MGE Topaz Inverters

Topaz S4  DC to AC Inverter  --

3.5 / 7 / 10.5 / 14 / 17.5 / 21kVA System Output

The Next Generation in AC Telecom Power

MGE's Topaz S4 N+1 scalable DC to AC inverter is the latest addition to the Topaz inverter line recognized as the industry standard for critical AC power by many of the world's leading telecom companies.   SCALABILITY: Scalable 3.5 kVA inverter power modules can be stacked in a N+1 redundant configuration (paralleled for redundancy or capacity) up to 21 kVA.

 OPTIMUM AVAIALABILITY: All modules are packaged into a "hot swap" receiver cabinet with an integrated maintenance bypass allowing rapid and safe exchange of any component without interruption to the critical load.

 NEBS STANDARDS: The S4 is one of the only inverters designed to meet NEBS standards assuring compatibility with all devices in a telecom environment. 

 RELIABILITY: Redundant microcontrollers feed control signals to each inverter along a dedicated and isolated control line resulting in an MTBF greater than 99 years. 

 TELECOM GRADE FILTERING: High-end power filters limit ripple current on the DC bus to a negligible 32 dB, preventing micro-cycling of the battery. EMI filters regulate conducted and radiated interference that could potentially create noise disturbances. This high grade filtering is unique to the S4 making it the choice for telecom environments. 

Advanced Features: 

• Constructed to NEBS /Telecom industry standards
• True Modular Scalability: 3.5 kVA-21 kVA (3.5 kVA modules) - add modules as your system grows
• Parallel for N+1 redundancy or capacity
• Safe hot swap technology
• Unparalleled reliability: no single points of failure
• Full front accessibility
• Ultra low profile: 21 kVA in 24 U with static switch
• Clean DC input < 30 dBrnc
• Precision output voltage regulation: < 2% THD
• ntegrated static bypass for added reliability
• LCD status display module
• SNMP / Web based monitoring (optional)
• Universal voltage and frequencies (user selectable)
• Customers supported by MGE's Trained and Certified Field Engineer force
• International agency certifications (UL, CE, TUV)

Maintenance Bypass: Safely and seamlessly transfers the output to an alternate AC source (utility power or protected AC power from another inverter or UPS system) allowing the inverter to be shut-down or removed without interrupting power to the critical loads. The Maintenance Bypass assembly is factory wired to the inverter module when ordered as a system.

 AC Distribution Panel: The AC distribution panel accommodates 20 single pole breakers and is available in 120 and 240 VAC versions. 10 x two pole breakers can be used if distribution alarm monitoring is required.

 Web Based Monitoring: The Falcon monitoring system (1.75" high rack mounted) provides inverter, maintenance bypass and AC distribution status and alarms over a closed network or via the Internet serving up web pages that can be viewed with a standard browser or via SNMP or dial up access. Accessories include environmental monitoring modules and auxiliary inputs to monitor other devices such as leak detection systems, room security or any other dry contact status points.

 Open Frame Relay Rack: All components can be mounted on an industry standard open frame relay rack with the entire inverter plant certified for zone 4 seismic installations. 

 Conduit Junction Boxes: (not required when mainstream bypass is used) Larger inverter modules such as the 14 kVA through 21 kVA require substantial cable gauges. The conduit junction box is factory mounted to the back of the inverter module, easing conduit landing requirements and simplifying installation of rear or side mounted cable entry systems.

Topaz S3 Inverters -  500VA - 1kVA  --

The Topaz S3 Inverter has set industry standards for design, performance and customer satisfaction. It is the smallest, most efficient draw out type inverter, 48 Volts DC input with wide range AC output voltages and frequency capability, designed for telecommunication market. The Topaz S3 is fully tested in strict compliance with the requirements of UL, cU, TUV, and CE. Features Isolated Boost Converter / Dual PWM inverter technology  Hot Swap capability  Cascade redundant configuration adds to the reliability  High efficiency 97% efficiency in off-line mode; 85% typical in on-line mode  Visual display, warning indicators  125% rated unit  Field selectable AC voltage: 100, 110, 115, 120, 200, 220, 230, 240  Field selectable frequencies: 50 / 60 Hz Selectable on-line / off-line (Bypass) mode with static switch and overvoltage protection on both mode of operations.  Maintenance bypass switch which enables the module to be Hot Swappable

Applications   Telecommunications   Data Processing   Building Management System   Railroad System Switching   Microwave Communications   Alternative Energy Systems   Fiber Optic Repeaters

Topaz S2 Inverters -  3 / 5 / 10kVA --

Features Global voltage/frequency capability  High frequency 5 & 10kVA and low audible noise  Optional AC distribution panel & maintenance bypass switch with frame assembly  Advanced microprocessor controlled status monitoring and High Mean Time Between Failure (MTBF)