Tektronix TDS3012C, TDS3014C, TDS3032C, TDS3034C, TDS3052C, TDS3054C Digital Phosphor Oscilloscopes

Tektronix TDS3000C Digital Phosphor Oscilloscopes

Ordering Info

TDS3012C

TDS3014C

TDS3032C

TDS3034C

TDS3052C

TDS3054C

TDS3000C Series Characteristics

Model	TDS3012C	TDS3032C	TDS3052C	TDS3014C	TDS3034C	TDS3054C
Bandwidth	100 MHz	300 MHz	500 MHz	100 MHz	300 MHz	500 MHz
Channels	2	2	2	4	4	4
Sample Rate (Ea Channel)	1.25 GS/s	2.5 GS/s	5 GS/s	1.25 GS/s	2.5 GS/s	5 GS/s
Maximum Record Length	10 K points on all models
Vertical Resolution	9-Bits on all models
Vertical Sensitivity (/div)	1 mV - 10 V on all models
Vertical Accuracy	±2% on all models*¹
Max Input Voltage (MΩ)	150 V_RMS CAT I on all models (300 V CAT II with standard 10X probe)
Position Range	± 5 div on all models
BW Limit	20 MHz	20, 150 MHz	20, 150 MHz	20 MHz	20, 150 MHz	20, 150 MHz
Input Coupling	AC, DC, GND on all models
Input Impedance Selections	1 MΩ in parallel with 13 pF or 50 Ω on all models
Built-In Ethernet	Yes, all models
Timebase Range (/div)	4 ns - 10 s/div	2 ns - 10 s/div	1 ns - 10 s/div	4 ns - 10 s/div	2 ns - 10 s/div	1 ns - 10 s/div
Accuracy	200 ppm
Display Monitor	Color LCD

*¹ = Derated at 0.025%/°C for temperatures above +30°C and below +18°C.

Acquisition Modes

DPO - Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. DPOs are able to provide 3 dimensions of signal information in real-time: amplitude, time and the distribution of amplitude over time.

Peak Detect - High frequency and random glitch capture. Captures glitches as narrow as 1 ns.

Sample - Sample data only.

Envelope - Max/Min values acquired over one or more acquisitions.

Average - Waveform data from 2 to 572 (selectable) acquisitions is averaged.

Single Sequence - Use the Single Sequence button to capture a single triggered acquisition sequence at a time.

Trigger System

Main Trigger Modes - Auto (supports Roll Mode for 40 ms/div and slower), Normal.

B Trigger - Trigger after time or events.

Trigger After Time Range - 13.2 ns to 50 s.

Trigger After Events Range - 1 to 9,999,999 events.

External Trigger Input - >1 megaohm in parallel with 17 pF; Max input voltage is 150 V_RMS.

Trigger Types

Edge - Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: DC, noise reject, HF reject, LF reject.

Video - Trigger on all lines or individual line, odd/even or all fields or analog HDTV formats (1080i, 1080p, 720p, 480p). See optional TDS3VID and TDS3SDI application modules for extended video triggering and measurement features.

Logic - (requires TDS3TRG)

PATTERN: Specifies AND, OR, NAND, NOR when true or false for a specific time.
STATE: Any logic state. Triggerable on rising or falling edge of a clock.

Note: Logic triggers can only be used on combinations of 2 inputs.

Pulse - (requires TDS3TRG)
WIDTH (or GLITCH): Trigger on pulse width less than, greater than, equal to or not equal to a selectable time limit ranging from 39.6 ns to 50s.

RUNT: Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.

SLEW RATE: Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling or either.

Comm (requires TDS3TMT) - provides isolated pulse triggering required to perform DS1/DS3 telecommunications mask testing per ANSI T1.102 standard.

Alternate - Sequentially uses each active channel as a trigger source.

Measurement System

Automatic Waveform Measurements - Period, Frequency, +Width, -Width, Rise-time, Fall-time, +Duty Cycle, -Duty Cycle, +Overshoot, -Overshoot, High, Low, Max, Min, P-P, Amplitude, Mean, Cycle Mean, RMS, Cycle RMS, Burst Width.

Display any four measurements from any combination of waveforms.

Thresholds - Settable in percentage or voltage.

Gating - Measurements can be gated using the screen or vertical cursors.

Waveform Processing

Deskew - Channel-to-Channel deskew ±10 ns may be manually entered for better timing measurements and more accurate math waveforms.

Arithmetic Operators - Add, subtract, multiply, divide.

Autoset - Single-button, automatic setup on selected input signal for vertical, horizontal and trigger systems.

Display Characteristics

Waveform Style - Dots, vectors and variable persistence.

Graticules - Full, grid, cross-hair, frame, NTSC, PAL, SECAM, vectorscope 100% and 75% color bars (with optional TDS3VID and TDS3SDI video application modules).

Format - YT, XY and Gated XYZ (XY with Z-axis blanking available on TDS30X4 only).

I/O Interface

Hardcopy Port (standard) - Centronics-type parallel.

TDS3GM Communications Module -

GPIB (IEEE -488.2) Programmability: Full talk/listen modes; Control of all modes, settings and measurements.
RS-232-C Interface Programmability: Full talk/listen modes; Control of all modes, settings and measurements. Baud Rate up to 38,400. DB-9 male connector.
Programmer Manual: 071-0381-01.

TDS3VM Communications Module -

VGA: Monitor output for direct display on large VGA-equipped monitors. DB-15 female connector, 31.6 kHz sync rate, EIA RS-343A compliant.
RS-232-C Interface Programmability: same as TDS3GM.
Programmer Manual: same as TDS3GM.

TDS3EM Communications Module -

Ethernet Port: 10Base-T with RJ-45 connector. Provides local area network printing and programming interface.
RS-232-C Interface programmability: same as TDS3GM.
Programmer Manual: same as TDS3GM.

Ethernet Built-In Communications Module - Ethernet Port: 10Base-T with RJ-45 Connector.
Provides local area network printing and programming interface.
RS-232-C Interface programmability: same as TDS3GM.
Programmer Manual: Same as TDS3GM.

Note: Only one Communications Module may be installed at a time.
All Communication Modules include WaveStar^TM Software for oscilloscopes 30-day, full-functioning product demo.

Hard Copy Capability

Graphics File Formats - Interleaf (.img), TIF, PCX (PC Paintbrush), BMP (Microsoft Windows) and Encapsulated Postscript (EPS).

Printer Formats - Bubblejet, DPU-3445, Thinkjet, Deskjet, Laserjet, Epson (9- and 24-Pin).

Environmental and Safety

Temperature - +5 to +50°C (operating), -20 to +60°C (nonoperating).

Humidity - 20% to 80% RH below 32°C, derate to 30% RH at 45°C (operating), 5% to 90% RH below 41°C, derate to 30% RH at 60°C (nonoperating).

Altitude - to 3,000 m (operating), 15,000 m (nonoperating).

Electromagnetic Compatibility - Meets or exceeds EN55011 Class A Radiated and Conducted Emissions; EN50082-1; FCC 47 CFR, Part 15, Subpart B, Class A; Australian EMC Framework; Russian GOST EMC regulations.

Safety - UL3111-1, CSA1010.1, EN61010-1, IEC61010-1.

Physical Characteristics

Instrument
Dimensions	mm	in.
Width	375.0	14.8
Height	176.0	6.9
Depth	149.0	5.9
Weight	kg	lbs.
Instrument only	3.2	7.0
w/battery	5.2	11.5
Instrument Shipping Package
Dimensions	mm	in.
Width	502.0	19.8
Height	375.0	14.8
Depth	369.0	14.5
Rackmount
Dimensions	mm	in.
Width	484.0	19.0
Height	178.0	7.0
Depth	152.0	6.0