Tektronix DPO3000 Digital Phosphor Oscilloscopes
|
Tiny footprint (ony 5.4 in deep)
Lightweight (9 lbs)
 Ordering Info
|
DPO3012 -- 2-channel, 100MHz
DPO3032 -- 2-channel, 300MHz
DPO3052 -- 2-channel, 500MHz
DPO3014 -- 4-channel, 100MHz
DPO3034 -- 4-channel, 300MHz
DPO3054 -- 4-channel, 500MHz
|
- Large screen is 9 inches and 800x480 resolution (WVGA)
- Tiny footprint (only 5.4 in deep) and light weight (9 lbs)
- Zoom-pan - dedicated front-panel controls
- Easy "book marking" for quick navigation between marks
- Serial buses - trigger on packet level content
- > 5X Over-sampling on all channels
- Three Year Standard Factory Warranty
DPO3000 Series Oscilloscopes
| Model No. |
DPO3012 |
DPO3032 |
DPO3052 |
DPO3014 |
DPO3034 |
DPO3054 |
| Input Channels |
2 |
2 |
2 |
4 |
4 |
4 |
Analog Bandwidth (-3 dB)
5mV / div to 1V/div |
100 MHz |
300 MHz |
500 MHz |
100 MHz |
300 MHz |
500 MHz |
| Calculated Rise Time 5mV / div (typical) |
3.5 ns
|
1.17 ns |
700 ps |
3.5 ns
|
1.17 ns |
700 ps |
Maximum Sample Rate
(all channels) |
2.5 GS/s |
Maximum Record Length
(all channels) |
5 M points |
| Trigger Types |
Provides integrated digital and bus views, bus decoding, and serial triggering and search based on packet content for the most popular serial standards: I2C, SPI, CAN, LIN, FlexRay, RS232/422/485/UART.
I2C and SPI support is provided with the DPOxEMBD application module.
CAN and LIN support is provided with the DPOxAUTO application module.
FlexRay, CAN, and LIN support is provided with the DPO4AUTOMAX*2 application module.
RS232/422/485/UART support is provided with the DPOxCOMP application module. |
| Power Source |
Power Source Voltage – 85 to 265 V ±10%.
Power Source Frequency – 45 to 440 Hz (85 to 265 V).
Power Consumption – 120 W maximum. |
| Waveform Math |
Arithmetic – Add, subtract, multiply and divide waveforms.
Math Functions – Integrate, Differentiate, FFT.
FFT – Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.
Advanced Math – Define extensive algebraic expressions including waveforms, math functions, scalars, up to two user-adjustable variables and results of parametric measurements e.g.,(Intg(Ch1-Mean(Ch1)) x 1.414 x VAR1). |
| Waveform Measurements |
Cursors – Waveform and Screen.
Automatic Measurements – 29, of which up to four can be displayed on screen at any one time.
Measurements include: Period, Frequency, Delay, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Rising Edge Count, Falling Edge Count, Positive Pulse Count, Negative Pulse Count, Area and Cycle Area.
Measurement Statistics – Mean, Min, Max, Standard Deviation.
Reference Levels – User-definable reference levels for automatic measurements can be specified in either percent or units.
Gating – Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, or waveform cursors. Measurements use full record by default. |
All models include:
(1) P6139A 500 MHz, 10x passive probe per channel, Front protective cover, User manual; includes front panel overlay for non-English languages (customers specify language when ordering), Documentation CD, NI LabVIEW SignalExpress Tektronix Edition LE CD, OpenChoice™ PC communication software, Calibration certificate, Power cord, Probe and accessory pouch and a Three Year Factory Warranty.
Optional Accessories:
Model Number |
Description |
| DPO3AUTO |
Automotive Serial Triggering and Analysis Module |
| DPO3EMBD |
Embedded Serial Triggering and Analysis Module |
| DPO3COMP |
Computer serial bus triggering and analysis module for RS232/422/485/UART buses. |
| DPO3VID |
HDTV and custom video triggering application module. |
| TPA-BNC |
TekVPI to TekProbe BNC Adapter |
| TEK-USB-488 |
GPIB to USB Adapter |
| 1196827 |
CompactFlash to USB Memory Card Reader |
| ACD4000 |
Soft Transit Case |
| HCTEK4321 |
Hard Transit Case (requires ACD4000) |
| RMD3000 |
Rackmount Kit |
| AMT75 * |
1 GHz, 75 Ohm Adapter |
| TCPA300/400* |
Current measurement systems |
| TDP0500 |
500 MHz TekVPI differential active probe, 42V |
| TAP1500 |
1.5 GHz TekVPI active FET probe |
| TCP0030 |
120 MHz TekVPI 30 amp AC/DC current probe |
| P5205 * |
1.3 kV, 100 MHz high voltage differential probe |
P5210 *
|
5.6 kV, 50 MHz high voltage differential probe |
P5100
|
2.5 kV, 100X high voltage passive probe |
| ADA400A * |
Differential Preamplifier |
* = Requires TPABNC TekVPI to TekProbe BNC Adapter
TekVPI TekProbe BNC Adapter
|
