Simpson Digital Panel Meters

Hawk Microprocessor-Based On-Off Controllers --

Choice of AC or DC power  Fits standard 1/8 DIN cutout  User password Protection  Key pad programmable from front panel  Easily programmed from menu  Dual 5 Amp relays optional  Dual setpoints  Dual alarms  Analog and digital outputs optional  Available for AC and DC Voltage/Current, TRMS AC Voltage/Current, 4-20mA DC, 1-5 VDC, Resistance, 3-Wire Potentiometer, Frequency, Tachometer (RPM), RTD and Thermocouples  An excitation output power source of 30mA at 12 VDC or 25mA at 24 VDC for external transmitters or transducers is available as an option

Series 2842, 2843, 4-1/2-Digits-0.56" LED, Red Display DC Measuring Instrument --

• Self-contained panel-mount DPM 
• 20µA Range for extremely accurate low current measurements such as transistor/diode leakage testing 
• BCD output with strobe line 
• 4-20mA, 0-100% range available 
• Jumper selectable offset 
• Dual slope integration 
• 4 1/2-digit (19999 counts) readout 
• Automatic polarity indication and zero 
• 0.02% of input accuracy on voltage ranges 
• State-of-the-art LSl circuitry 
• 117VAC, 50-400 Hz or 5 VDC operation 
• Input/output edge connector included 
• Display hold 

HAWK II Series Controllers --

Easily programmed from the front panel  3-1/2 digit LED  User friendly software functions include: password; display scaling; decimal point selection; zero, one or two setpoints; peak-valley value; and time delay & hysteresis  Screw terminal connector for easy installation  1/8 DIN, shallow depth case, 3.5" (89mm) for restricted space behind panel  Nema 4/IP 65 front panel  Functions: DCV, DCA, ACV, ACA Process (4-20mA DC, 1-5 VDC), Resistance Temperature (J, K, Pt100 RTD)  Power supply: 110/220 VAC, 12-48 VDC  Optional 5 Amp relay outputs, excitation outputs (12, 24 VDC) and analog outputs  Panel cut out/depth: 3.6" x 1.8" x 3.24"

Falcon Series Indicators --

DC, AC and AC TRMS voltage and current and temperature ranges  Choice of AC or DC power supplies  Large, 0.56" (14.2mm) high, red LED display with automatic zero and polarity indication  Easy installation using screw terminals  Shallow depth, 3.12" (79mm) for restricted behind panel space  Fits Standard 1/8 DIN cutout  Direct 5A AC input for use with donut current transformers  Broad range scaling and adjustable zero offset for process inputs  Optional excitation output 12 VDC or 24 VDC  User selectable decimal point  Display Hold  Jumper selectable ranges  Basic accuracy of 0.1% ±1 digit for DC inputs

Phoenix P130 and P140 PID Controllers

• Easily programmed from the front panel 
• SMART auto-tuning for automatic adjustment and continuous tuning of optimum control parameters 
• Full PID or On-Off control 
• Dual display: both measurement and set point values 
• Two outputs standard 
• Standard screw terminal connector with safety cover 
• IP65/NEMA 4X protection

• Choice of T/C or RTD inputs (J, K, L, N or RTD Pt100) 
• Choice of Process, Band, Deviation or Instrument Failure Indicator Alarm 

Series P140

• Choice of T/C, RTD or Linear inputs (J, K, L, N, R, S, RTD Pt100, mA, mV or V) 
• Up to 2 independent alarms with choice of Process, Band or Deviation 
• Automatic or manual reset of alarm condition 
• Optional heater break detection 
• Optional auxiliary set point 

Mini-Max Temperature Indicator --

User-selectable input type: J or K T/C, RTD Pt100, mV  4 digit red LED display, 0.56" (14.2mm) high  Minimum depth indicator, less than 2.5" (60mm) of space required behind the panel  Fits standard 3/64 DIN cutout  Standard screw terminals for easy installation  Unique mounting bracket allows stacking of multiple units  90-240VAC power

Mini-Max Process Indicator --

3-1/2 or 4-1/2 digit LCD display  Optional negative image red backlighting  Choice of 4-20mADC, 1-5VDC, or 0-10VDC input  Broad range display scaling and adjustable offset  90-240VAC or 9-32VDC power  Standard screw terminals for easy installation  Fits standard 3/64 DIN cutout, depth less than 2.5" (60mm)

660 Series Counters --

Rugged case, designed to NEMA 4/IP 65 standards  Durable electrical design for industrial applications  Words, not symbols, guide you through the programming of all functions and features  Functions: count (up or down), rate, quadrature (x1, x2, x4), anti-coincidence, rate/count  Optional single or dual presets available for control functions  Optional single or dual relay card for preset control functions  Broad range scaling accessed through the front panel buttons  Large 6 digit red 0.56" LED display  Short 3.12" (79mm) deep 1/8 DIN case  Screw terminal connector for easy installation  Power supply: 9-32VDC standard, 110/220VAC optional  Optional excitation (12VDC, 100mA)  Panel cutout and depth: 3.6" x 1.8" (92mm x 45mm), 3.12" (79mm)