Signet Flow Sensors
Insertion Sensor Technology
- Compact size to fit any installation needs
- Widest range of wetted material
- Lowest cost per sensing point
- Completely field serviceable, no shop time required
- Complete PVDF sensors and fittings to maintain water purity
- Companion fittings available in virtually any material and pipe size
515 Rotor-X Flow Sensor --
|
- Simple installation
- Minimal maintenance
- Rugged construction
- Available in a variety of materials
- Output Signals: 1V p-p per ft/s nominal
- Output Frequency: 6Hz per ft/s nominal
- Flow Rate Range: 1 to 20 ft/s
- Linearity: ±1% of full range
- Repeatability: ±0.5% of full range
- Polypropylene or PVDF housing
- Titanium or Hastelloy C shaft
|
319 Rotor-X Wet-Tap Flow Sensor --
| |
- Eliminates downtime
- Corrosion resistant
- Includes isolation valve
- Temperature/Pressure Rating: 100 PSIG max. at 68°F (20°C); 25 PSIG max. at 140°F (60°C)
- Recommended Installation/ Removal Pressure: 25 PSIG at 25°C
- PVC assembly
- Polypropylene housing
- Titanium shaft
- Pipe Sizes: 0.5 to 4", 5 to 8" or 10"-up
|
2540 Metalex Hot-Tap Flow Sensor --
|
- Stainless steel construction
- Measures flow rates as low as 0.3 ft/s, 0.1 m/s
- No magnet in process fluid
- Simple installation using common fittings
- Sensor installation/removal without shutdown with Hot-Tap version (pictured)
- Standard sensor installs in 1.5 to 24 inch pipes
- Available with NPT or ISO threads
- Power requirements: 5 to 24 VDC
- Output signal: open collector, sinking, proportional to flow velocity
- Output current: 10 mA max.
- Flow rate range: 0.3 to 20 fps
- Pipe size range: 1.5 to 36 in.
|
515 PVDF Flow Sensor --
|
- Ultra-pure water measurement
- Excellent chemical compatibility
- Easy to install and maintain
- Compatible with Signet PVDF installation fittings
- Linearity: ±1 % of full range
- Repeatability: ±0.5% of full range
- Flow Rate Range: 1 to 20 ft/s
- PVDF housing and shaft
- Pipe Size: 0.5 to 4" or 5 to 8"
|
2536 Rotor-X Low Flow Sensor --
|
- Flow rates as low as 0.3 ft/s
- Simple installation
- Easy maintenance
- Range: 0.3 to 20 ft/s
- Linearity: ±1% of full range
- Repeatability: ±0.5% of full range
- Power: 5-24 VDC, l0 mA max.
- Output: open collector, sinking
- Polypropylene or PVDF housing
- Pipe Sizes: 0.5 to 4" or 5 to 8" (polypropylene/PVDF housing); 10"-up (polypropylene housing)
|
525 Metalex Flow Sensor --
|
- Handles pressures to 1500 PSI
- Operates in temperatures to 300°F
- FM/CSA approved
- Flow Rate Range: 1.6 to 20 ft/s
- Rotor: CD4MCu Stainless Steel
- Sensor Body: 316 Stainless Steel
- Rotor Shaft: 316 Stainless Steel or Tungsten Carbide
- Pressure: 1500 PSI with mini-tap
- Temperature: 300°F with mini-tap
- Linearity: ±1% of range
- Three models available
|
|
