Contact the closest office: 1-800-358-5525

Shimpo Stroboscopes & Tachometers

Stroboscopes

Removable Handle
Compact simple, portable instrument whose sole purpose is to be mounted on a particular machine or apparatus to monitor its action continuously or at certain intervals of time
Microprocessor-controlled and is designed to operate only on the external mode in order to synchronize the flashing rate of the strobe with the speed (rotation, vibration etc) of the machine in operation
There is no display available
Provides an output voltage of 12VDC to power various sensors
Can be externally triggered through Shimpo's RS220H photo sensor or proximity switches and other sensors
Flashing Range: 0-15,000FPM
Impedance: 10K

Removable Handle
Designed for observing rotating, reciprocating or linear movement of different types of equipment for prevention of possible failure
5-digit LED display which updates every 0.2 seconds in the internal mode and every 1 second when it is externally triggered
Resolution is 0.1 FPM from 54-4000 FPM (floating decimal point) and 1 FPM from 4,000-33,000 FPM
Can be externally triggered through Shimpo's RS220H photo sensor or proximity switches and other sensors
Provides a 12VDC output to power most applicable sensors
Push on/push off power switch, external trigger capability synchronous output signal to drive other equipment including other strobes of its own kind, membrane push button selector for FPM (phase shift) in degrees or delay time in ms., a membrane push button that doubles the flashing and display rate with just one activation, a membrane push button that divides the flashing and display rate in half with a single touch, membrane push buttons that increase or decrease the phase shift by one degree per excitation all the way from 0š to 359š or 0 to 333ms
Flashing Range: 54-33,000 FPM
Accuracy: Internal mode ±.01% of reading; External mode ±.01% ±1 digit

Removable Handle
Designed for a wide range of industrial applications and specifically where AC power is not acessible to the user
Enclosure is made out of extruded aluminum and all the controls are mounted on the back panel for easy accessibility
Temperature drift is virtually eliminated through the use of the microprocessor circuit
Incorporates all the unique features that model DT-311
Provides a 12VDC output to power various sensors such as the Shimpo RS220H which can be used to externally trigger the unit
Powered by a set of 12V rechargeable batteries (powers the unit full speed for approximately 1 hour continuously when fully charged)
Flashing Range: 54-33,000 FPM
Accuracy: Internal mode ±.01% of reading; External mode ±.01% ±1 digit

Removable Handle
Automatic brightness control
Drift free
Phase Shift
Flash delay
External trigger input
Synchronous signal output
+12VDC output (to power sensors)
Continuous duty
Die cast aluminum housing
Strobe flashing can be continuous or set to seize (through a "cut-off" timer) anywhere from 1 to 99 minutes
Powered by a 12V rechargeable battery pack which can power the unit full speed for approximately 4 hours continuously when fully charged
Flashing Range: 54-33,000FPM
Accuracy: Internal mode ±.01% of reading; External mode ±.01% ±1 digit

Battery operated, hand held, computer-circuitry-controlled, contact type tachometers
Largest Memory Capacity: Provides last reading, maximum, minimum and 4 intermediate speed readings - automatically, or by selection
Display Range: 0.1 to 25,000 RPM with floating decimal
Minimum shaft loading overspeed protection
Die-cast aluminum housing
1 year warranty
Accessories Available: Cone adapters, funnel adapter and measuring wheels

LED 5 Digit Display
Easy reading in dim environment
Accuracy: ±.1 RPM; 0.1 to 999.9; ±1RPM: 900-25,000RPM
Memory System: stores 7 readings for 4 minutes
Also available: MODEL DT-107-A2 Handheld Digital Length Meter or Digital Counter. Measures or counts: cm ±1 m ±.1, y ±.1 and Ft. ±.1 (caution: use only 12" cir. wheel)

Low power consumption battery operated, hand held, microprocessor controlled, non-contact type tachometers
Directly display RPM measurements sensed from an easy-to-aim visible light beam directed toward a rotating shaft disc or pulley
Speed measurements as low as 6 RPM
Expanded Memory - Provides 7 readings - including last maximum, minimum and four intermediate readings
High reliability and low maintenance
Housing made of strong die-cast aluminum
1 year warranty
Accessories Available: Reflective tape, cone adapters, funnel adapters, extension shaft and measuring wheels
Adapter for contact operation included

Send Inquiries to: