Shimpo Panel Counters

Model DT-6CG Bi-Directional Batch Counter

• Easy mounting; no brackets, screws or any other hardware is required 
• Accepts a wide variation of AC input line voltage 
• 6-digit large LED display 
• Selectable decimal point 
• 10-year EEPROM memory back up 
• Presettable (remotely or from front panel) 
• BCD output 

Modules used with Model DT-6CG Panel Counter

COP-PS for Front Panel Presetability

• Connects to the DT-6CG panel counter through its 20-pin connector. Allows the counter to be preset and operate in four different and distinct modes. 1) a double stage preset can be accomplished (in the positive domain only). 2) a double stage preset can be achieved with one number set in the positive domain and the other in the negative. 3) a "batch" count set up can be arranged. 4) a single stage preset in the positive domain and a slave secondary output with a delay of up to 99.9 sec. can be achieved. Weighs 3.5oz. (1 00g) 

COP-BC for BCD Output Signal

• When plugged into the DT-6CG panel counter through its 20-pin connector, enables the counter to output its data in a BCD format for further processing. Weighs 3.5oz. (100g) 

COP-EX for "Remote"

• Presetability 
• In conjunction with module COP-PS enables the DT-6CG panel counter to be preset remotely through a COP-4L1, 4M1, 6L1 or 6M1 Switching arrangement. Whenever the COP-EX has to be used. the COP-PS must be used also for proper operation. With this arrangement. the front panel presetability function is inhibited. Weighs 3.5oz. (100g) 

Model DT-6LS Up-Count Counter

• Economical 
• 6-digit large LED 
• Power failure back-up feature 
• Accepts a variety of input signals 
• Impedance: 10K ohms 
• Wave form: Sine (Rectangular and Mechanical contact) 
• Sensor Power Supply Voltage: 12 VDC ±0.5V 
• Current: 50mA (max.) 
• 1/8 DIN panel cutout 

Model DT-6CL Bi-Directional Counter

• Easy mounting; no brackets, screws or any other hardware is required 
• Accepts a wide variation of AC input line voltage 
• 6-digit large LED display 
• 10 year EEPROM memory back up 
• Measuring Range: -1999999 to +1999999 
• User selectable decimal point 
• Counter can be reset through the front membrane reset switch or on external set of contacts 

DOP-SD for RS232 Output (option for DT-6CL)

• When coupled with the DT-6CG counter, it provides an RS-232C/MTl output signal for long line transmission and processing. The baud rate, parity and data bit lengths are adjustable to fit any electronic device capable of accepting RS-232C signals. For statistical analysis. This particular arrangement can be interfaced with Mitutoyo's digimatic processors such as the DP-1DX, DP-2DX and DP-3DX. Weighs approx. 3.5 oz. (95g)