Shimpo Panel Mount Tachometers

Model DT-5TG

• Performs a host of functions besides reading and displaying RPM 
• Easy mounting. No brackets, screws or any other hardware is required 
• Tolerates a wide variation of line voltage 
• Immune to electrically noisy environments 
• Parameters and functions are programmable via front panel membrane push button switches 
• Accepts a variety of input and output modules 
• No mathematical formulas to remember 
• Highly accurate 
• Provides a 12VDC signal to power various sensors 
• Has the ability to test itself 
• Available in 3 different configurations: 
• - DT-5TG-0; does not accept any modules; will display RPM, surface speed (linear speed) and flow rote 
• - DT-5TG-1; accepts all the individual modules 
• - DT-5TG-2; accepts various pairs of input/output modules and enables the user to configure on enormous number of field applications 

DOP-Modules for use with DT-5TG Panel Tachometer

• The DOP-FV module coupled with the DT-5TG panel tachometer provides on analog output (either voltage or current) which is proportional to the input signal frequency. The voltage range is 0 to 10VDC and the current 4 to 20mA DC 
• Incorporates a custom made microprocessor and a twelve bit A/D converter which enables the user to achieve a full span analog output regardless of the range of the input signal 
• Any recorder or acquisition system that is able to accept the above-mentioned voltage or current parameters can be used with this particular arrangement to acquire and record desirable data 

• Incorporates three independent relays which work in conjunction with the display functions "HI", "GO" and "LO" of the DT-5TG panel tachometer to monitor and control external machine processes. It also features a current. sinking transistor which is activated when the monitored rate reaches zero 
• Weighs only 3.5oz. (95g) 

• Designed so that when coupled with the DT5TG panel tachometer, it will provide an RS-232C/MTI output signal for long line transmission and processing 
• The baud rate, parity and data bit lengths are adjustable to fit any electronic device capable of accepting RS232C signals 
• For statistical analysis, this particular arrangement con be interfaced with Mitutoyo's digimatic processors such as the DP-1DX, DP-2DX and DP-3DX 
• The unit weighs approximately 3.5oz. (95g) 

• Designed to work in conjunction with the DT-5TG panel tachometer to provide a BCD output in applications where it is required 
• The information displayed on the DT5TG is presented to a 32-pin connector mounted on the back of the DOP-BC in a BCD form for further processing. The same is true for the decimal point and certain other functions 
• All BCD output signals are TTL compatible 
• The unit plugs into the DT-5TG tachometer through a 20-pin connector and weighs only 3oz. (80g) 

• Allows the DT-5TG panel tachometer to be used as a ratio meter 
• Can measure and display in percent the absolute ratio of two rate functions (B/A), dispersion ratio (B/A-1) and the difference of the two rates (B-A) 
• The unit weighs only 3.5oz. (100g) 

• The DOP-PO module when plugged into the DT-5TG panel tachometer through its 20-pin connector, enables the unit to deliver the displayed information to any printer that has the capability of accepting data in a parallel format 
• The unit weighs only 3.5oz. (100g) 

• The DOP-VF module when combined with the DT-5TG panel tachometer enables the DT-5TG to measure not only rates such as RPM, linear speed, flow rate, etc., but also DC and AC voltages (whether these voltages are generated through a tachogenerator or any other source) and display these voltages in desired rate units 
• Voltages from -100VDC to +100VDC and 0 to 100VAC (RMS) can be precisely measured 
• Weighs only 6oz. (170 g) and plugs in the back of the DT-5TG 

Model DT-4RL

• 4-digit LED unit 
• Fits 1Ž8 DIN panel cut-out 
• Scalable; can be read and display both rotational (RPM) and linear speeds 
• Selectable pulses per revolution; 1, 10, 20, 30, 60 and 120 PPR 
• Autorange decimal point 
• Available in 110 or 220VAC (50/60Hz) 
• Highly accurate (0.01% FS) 
• Overrange indication 
• No input signal indication 
• 12VDC supply available to power various sensors 

Model DT-5TP

• Microprocessor-controlled 
• Highly accurate; ±0.008% ±1 digit 
• Accepts many different types of sensors 
• Immune to electrically noisy environments 
• Easy for panel mounting; snaps right into place 
• Front panel access to membrane push buttons for programming 
• Tolerates a wide variation of line voltages 
• "Data Set" button locks in the number of pulses per revolution and the decimal point 
• Two modes; standard measuring and self-test 
• Can measure FPM by utilizing the capabilities of Model RE1B-60C rotary pulse generator and a 12" surface speed wheel in special cases