Red Lion PID and Multi-Loop Controllers
TCU/PCU
Temperature Control Unit / Process Control Unit
|
- Temperature Control Unit (TCU)
- Process Control Unit (PCU)
- 96mm x 48mm
- Dual 4 Digit, 0.4" (10mm) LED, 0.3" (7.6mm) LED
- Auto-tune
- Relay, SSR Drive, Triac Outputs
- Linear DC Outputs
- Heat/Cool
- UL/CUL Recognized
|
TCU/PCU HCM
Temperature / Process Heater Current Monitor
|
- TCU w/ Heater Current Monitor
- PCU w/ Heater Current Monitor
- 96mm x 48mm
- Dual 4 Digit, 0.4" (10mm) LED, 0.3" (7.6mm) LED
- Auto-tune
- 100 mA AC from CT
- Relay, SSR Drive, Triac Outputs
- Linear DC Outputs
- Heat/Cool
-
UL/CUL Recognized
|
TSC/PSC
Temperature / Process Ramp & Soak Controller
|
- 96mm x 48mm
- Dual 4 Digit, 0.4" (10mm) LED, 0.3" (7.6mm) LED
- 0.15% Accuracy
- Ramp/Soak
- Event Outputs
- Multi-setpoint
- Relay, SSR Drive, Triac Outputs
- Linear DC Outputs
-
UL/CUL Recognized
|
TCU/PCU RSP
Temperature / Process Remote Setpoint Controller
|
- TCU w/ Remote Setpoint
- PCU w/ Remote Setpoint
- 96mm x 48mm
- Dual 4 Digit, Temp: 0.4" (10mm) LED, Auxiliary: 0.3" (7.6mm) LED
- Auto-tune
- 0-20 mA
- Internal or External Cascade Control
- Relay, SSR Drive, Triac Outputs
- Linear DC Outputs
-
UL/CUL Recognized
|
TCU/PCU MVP
Temperature / Process Motor Valve Positioner
|
- TCU w/ Motor Valve Positioner
- PCU w/ Motor Valve Positioner
- 96mm x 48mm
- Dual 4 Digit, 0.4" (10mm) LED, 0.3" (7.6mm) LED
- Auto-tune
- Slide-wire Feedback
- Open/Close Outputs
- Relay, SSR Drive, Triac Outputs
- Linear DC Outputs
-
UL/CUL Recognized
|
T48 / P48 1/16 DIN Temperature / Process Controller
|
- Temperature Control Unit (T48)
- Process Control Unit (P48)
- 48mm x 48mm
- Dual 4 Digit Display, 0.4" (10mm) Red and 0.3" (7.6mm) Green
- Relay, SSR Drive, Triac Outputs
- Linear DC Outputs
- Heat/Cool
-
UL/CUL Recognized
|
T16/P16 Temperature / Process Controllers
 |
- PID Control with Reduced Overshoot
- T16 Accepts TC and RTD Inputs
- P16 Accepts 0-10V and 0/4-20mA Signals
- On Demand Auto-Tuning of PID Settings
- DC Analog Output (Optional)
- PC or Front Panel Programming
- PC Configurable with TP16KIT
|
DLC Dual Loop Controller
 |
Dual Loop Controller
- Modular Building Block for Multi-Zone Process Control
- Two Independent PID Control Loops
- PID Control with Reduced Overshoot
- Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20mA
- On Demand Auto-Tuning of PID Settings
- Two DC Analog Outputs (Optional)
- Windows™ Configuration Software
- RS485 Modbus™ Protocol
|
Modular Controller
Build and integrate PID control systems in minutes,
not hours.
 |
With Red Lion’s Modular Controller Series, you can integrate multi-zone
PID control into your system in a fraction of the time you’d need with
other solutions.
-
Accurate, robust PID control outside the PLC.
-
Fully integrate PID with your PLC, PC and HMI for better, more user-friendly
systems.
- Easy Windows® software enables you to set application parameters quickly.
-
Slash assembly time: DIN rail hardware requires no panel cutouts.
To add loops, just snap more modules in place. Red Lion’s Modular
Controller gives you solid PID control and drastically cuts your engineering
time— even more for multi-zone PID. Flexible, versatile, and
cost effective, the Modular Controller is the only way you’ll want
to build systems. |
Master Module
-
Provides power and high speed communications for up to 16 modules.
-
Stores firmware for modules, and updates them automatically, eliminating
hardware conflicts.
-
Built-in drivers communicate directly to PLC. No comms protocols to write,
or store, in PLC memory.
-
10-base-T Ethernet connection for networked systems.
-
RS-485 and RS-232 connections provided.
PID Modules
Each module controls one loop (four modules shown in image above) and accepts
thermocouple, RTD, or 0-10V / 4-20mA signals. The compact, modular
design eliminates bulky fixed backplanes or racks.
-
If any module, or the Master fails, the rest of the system keeps working.
- Hot-swappable – the Master knows each module’s configuration, so a replaced
module assumes proper operation. No reprogramming!
|
