Partlow Gas Temperature Controls 

Partlow Model 10  -- 

Taped for 1/2" pipe only, these valves control kerosene, fuel oil, and liquid phase LP gas without freeze up.  Heavy-walled bronze body with delrin valve seat and stainless steel valve.  May be used for mobile applications, like tar kettles.  Ten operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 65 psi  1 Year warranty  Agency Approvals none

Partlow Model 20 -- 

Taped for 3/8" pipe only, these valves are for temperature control on small appliances at lower pressure. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast parts. May be used for mobile applications, like tar kettles. Ten operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 1 psi  1 Year warranty  Agency Approvals none

Partlow Model 70  -- 

Taped for 3/4", 1 1/4", 2", or 3" pipe, and intended for use on horizontal pipelines, these valves are for temperature control on moderate to large capacity gas-fired appliances at higher pressure. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast parts. Designed for stationary applications only. Eleven operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Max pressure   3/4", 1 1/4", and 2" sizes: 20 psi   3" size: 1 psi with capacity to 5000 cfh  1 Year warranty  Agency Approvals none

Partlow Model 713A  -- 

Taped for 1 1/4" pipe only, and intended for use on horizontal pipelines in very sensitive applications, these valves are for temperature control on moderate capacity gas-fired appliances. Larger seats and balls than Model 70. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast parts. Designed for stationary applications only. Eleven operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 20 psi  1 Year warranty  Agency Approvals none

Partlow Model 40  -- 

Taped for 1" pipe only, and intended for use on vertical pipelines, these valves are for temperature control on small or medium capacity gas-fired appliances at lower pressure. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast parts. Designed for stationary applications only. Eleven operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 1 psi  1 Year warranty  Agency Approvals none

Partlow Model 48  -- 

Taped for 1/2" pipe only, and intended for use on vertical pipelines, these valves are for temperature control on small or medium capacity gas-fired appliances at moderate pressure. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast parts. Designed for stationary applications only. Eleven operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 5 psi  1 Year warranty  Agency Approvals none

Partlow Model 60  --

Taped for 1", 1 1/4", 1 1/2", or 2" pipe, and intended for use on horizontal pipelines, these valves are for temperature control on moderate capacity gas-fired appliances at lower pressure. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast. Designed for stationary applications only. Eleven operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 1 psi  1 Year warranty  Agency Approvals none

Partlow Model 28  -- 

Taped for 3/8" pipe only, these valves are for temperature control on small appliances at higher pressure. Heavy-walled die-cast aluminum body. Internal mechanisms are machined brass, and aluminum and zinc die-cast parts. May be used for mobile applications, like tar kettles. Ten operating ranges covering -30ºF to 1100ºF. Standard Features Adjustable by-pass for minimum flame, if required  Key Specifications +/- 1% Accuracy  Maximum pressure: 40 psi  1 Year warranty  Agency Approvals none