COMMON SPECIFICATIONS - ALL MODELS

INPUT/OUTPUT PROTECTION
CMV, Input to Case or Output: 2100 Vp per HV test, 354 Vp per IEC spacing
CMR, Input to Case or Output: 120 dB, DC to 60 Hz
NMV Across Output Leads: 120 Vac for 1 min
Reverse Polarity Across Output Leads: 400 Vp

ACCURACY, -40°C to +85°C
Hysteresis & Repeatability: ±0.1% of span 6-month
Stability Error: ±0.2% of zero suppression
Error Due to 50°C Change in Transmitter Temperature: Zero Error: ±0.2% of zero suppression Span Error: ±0.2% of span

ENVIRONMENTAL
Operating temperature: -40 to +85°C (-40 to +185°F)
Storage Temperature: -55 to +125°C (-67 to +257°F)
Relative Humidity: 0 to 100% (sealed case)
Watertight Proof Pressure: 35 kPa (5 PSI) Shock: 55 g, half sine, 9-13 ms duration
Vibration: 1.52 mm (0.06 in) double amplitude, 10-80 Hz cycled

MECHANICAL
Case Material: Zamak® zinc alloy
Gasket Material: Fluorosilicone
Diameter: 74 mm (2.9 in)
Height, Including Barriers: 53 mm (2.1")
Weight: 380 g (13 oz)
Electrical Connection: #6 screws with wire clamps
Terminal Protection: Standard: Screw terminal barriers plus barrier strip cover CPB1 (Optional): Plastic cover for case top (protects T/C screw terminals from air currents)

NON-COMMON SPECIFICATIONS

RTD INPUT - MODEL 501
Signal Source: Pt 100 RTD
Span for 4-20 mA Output: 100 to 1050°C (180 to 1890°F)
Zero Suppression: -200 to +750°C (-328 to +1382°F)
Source Connection: 2- or 3-wire
Excitation Current: 200 µA
Lead Resistance, Max: 100 ohm
Bandwidth: DC-60 Hz

OHMS INPUT MODEL 501
Signal Source: 0-400 ohm
Span for 4-20 mA Output: 35 to 400 ohm
Zero Suppression: 0 to 365 ohm
Source Connection: 2- or 3-wire
Excitation Current: 200 µA
Lead Resistance, Max: 100 ohm
Bandwidth: DC-60 Hz

THERMOCOUPLE INPUT MODEL 502A
Span and Zero Suppression: See input table
Input Resistance (Open T/C Detector Resistance): 5 M ohm
Bias Current, Max: 50 nA
NMV Across Input Leads: 120 Vac for 1 min
NMR Across Input Leads: 40 dB, 50/60 Hz, 100 mV input
Thermocouple Lead Resistance: For specified performance: 100 ohm Maximum: 10 kohm
Step Response, Type: 400 ms

MILLIVOLT INPUT MODEL 504
Span for 4-20 mA Output: 5 to 100 mV
Zero Suppression: -30 to +60 mV
Input Resistance: 100 M ohm
Bias Current, Max: 50 nA NMV
Across Input Leads: 120 Vac for 1 min
NMR Across Input Leads: 40 dB, 50/60 Hz, 100 mV input
Step Response, Type: 400 ms

MILLIAMP INPUT MODEL 505
Span for 4-20 mA Output: 5 to 100 mA
Zero Suppression: -30 to +60 mA
Input Resistance: 1 ohm
Step Response, Type: 400 ms

VOLT INPUT MODEL 506
Span for 4-20 mA Output: 0.5 to 5 V (506-1); 5 to 50 V (506-2)
Zero Suppression: -3.5 to +6.0 V (506-1); -35 to +60 V (506-2)
Input Resistance: 1 M ohm Bias Current, Max: 1 nA
NMV Across Input Leads: 120 Vac for 1 min
NMR Across Input Leads: 40 dB, 50/60 Hz, 100 mV input
Step Response, Type: 400 ms

Quick Selection Guide by Input Type

Model	Signal Type	Zero Suppression* for 4 mA Output	Maximum Signal* for 20 mA Output	Signal Span* for 20 mA Output	Input Impedance
501	RTD Pt 100 Ohms	-200 to +750°C -328 to +1382°F 0 to 365 ohm	+850°C +1562°F 400 ohm	100 to 1050°C 180 to 1890°F 35 to 400 ohm	N/A
502A-J	Type J T/C Iron Constantan	-50 to +660°C -58 to +1220°F	+760°C +1400°F	100 to 810°C 180 to 1458°F	5 Mohm
502A-K	Type K T/C Chromel Alumel	-50 to +1272°C -58 to +2322°F	+1372°C +2502°F	100 to 1422°C 180 to 2560°F	5 Mohm
502A-T	Type T T/C Copper Constantan	-50 to +350°C -58 to +662°F	+400°C +752°F	50 to 450°C 90 to 810°F	5 Mohm
502A-E	Type E T/C Chromel Constantan	-50 to +900°C -58 to +1652°F	+1000°C +1832°F	100 to 1050°C 180 to 1890°F	5 Mohm
504	Millivolts	-30 to +60 mV	+160 mV	5 to 100 mV	100 Mohm
505	Milliamps	-30 to +60 mA	+160 mA	5 to 100 mA	1 ohm
506-1	Low Volts	-3.5 to +6.0 V	+11 V	0.5 to 5 V	1 Mohm
506-2	High Volts	-35 to +60 V	+110 V	5 to 50 V	1 Mohm
508B	Companion Product to 500 Series Transmitters

*The signal span shown in column 5 for 4-20 mA output cannot include inputs below the maximum signal in column 4.

To Order (Specify Model No.) Prices Shown in U.S. Dollars

Model #	Description
501	RTD (Pt100) or ohms (default cal. 0-850°C)
502A-J	Type J thermocouple (default cal. 0-500°C)
502A-K	Type K thermocouple (default cal. 0-800°C)
502A-T	Type T thermocouple (default cal. 0-400°C)
502A-E	Type E thermocouple (default cal. 0-500°C)
504	Millivolt input 5 to 100 mV span (scalable)
505	Current input (scalable) loop isolator
506-1	500 mV to 5 Vdc input span
506-2	5 V to 50 Vdc input span
508B	Companion Product to 500 Series Transmitters

508B 508B A 3 1/2 digit (±1.999 count) loop-powered indicator with an LCD display and a jumper-selectable dummy right-hand zero for display to ±19.990. An ideal companion product to 500 Series transmitters, with the same hockey-puck case and rugged environmental specs. FM and CENELEC intrinsic safety certification are available as an option.

OPTIONS AND ACCESSORIES

Option	Description
-FS	Custom scaling. Specify input signals corresponding to 4 and 20 mA
DS	Downscale overrange (under 4 mA)
CBP1	Plastic cover for screw-terminal barrier strip
MAT1	Adaptor plate, surface or 2.75", (69.9 mm) relay track
MDT1	DIN rail clamp
EPH1	External single-height environmental enclosure, NEMA-7 and NEMA-4 rated, with FM and CENELEC EEx d II C certification. Includes MXS1 spring retainers.
EWP2	External double-height environmental enclosure, with window for 500 Series transmitter on bottom and one 508B loop-powered indicator on top. NEMA-7 and NEMA-4 rated with FM and CENELEC EEx d II C certification. Includes MXS2 spring retainers.
MXS1	Replacement spring retainers for EPH1 or customer-supplied explosion-proof housing
MXS2	Replacement spring retainers for EPW2 or customer-supplied explosion-proof housing

Ordering Example:
1.) 504-FS (-1 to 30 mV = 4 to 20 mA)
2.) 504 (customer will calibrate for 0 to 50 mVdc = 4 to 20 mA)