Contact the closest office: 1-800-358-5525

  FW Bell Electronic Test Equipment

5100 Series Hall Effect Gauss / Tesla Meters

    The 5100 Series Hall effect portable gaussmeters represent the most recent design from the world leader in
    magnetic measuring equipment. This new design incorporates the use of digital signal processing technology
    making it the world’s first hand-held gaussmeter to have a digital signal processor (DSP) on board. F.W. Bell’s
    exclusive Dynamic Probe Connection allows measurements from 0 to 30 kG with a basic accuracy of 1%.

    The 5100 Series Hand-Held Gaussmeter’s built-in software eliminates the need for complex calibration
    procedures. User prompts on the custom formatted LCD allow fast, simple push button operation. All models
    come equipped with a detachable transverse probe, zero gauss chamber, instruction manual, hard carrying
    case, and four AA batteries. Axial, ultra thin transverse and low-field probes are available as options.

  • Transverse Probes and Zero Gauss Chamber
  • The Best Accuracy in it's class
  • Universal Serial Bus Interface
  • Frequency Response 2X better than any other instrument in it's class
  • The only handheld instrument utilizing DSP (Digital Signal Processing)
  • Optional Axial Probe Available
  • Available Programming Software
  • Utilizes 4 AA Batteries
  • Battery Life of 20 hours

5000 Series Hand-held Gaussmeters

5060     *    5070     *    5080

Buy It Now !  Ordering Info
Model
5060
5070
5080
Probe Included
Yes
Yes
Yes
Auto Zero
Yes
Yes
Yes
Min/Max Hold
-
Yes
Yes
True RMS
-
Yes
Yes
Auto Range
-
Yes
Yes
True Peak Hold
-
-
Yes
Relative Mode
-
-
Yes
Outputs (Analog)
-
-
Yes
Communication Port
-
-
Yes
 
Model
5060
5070
5080
Basic Accuracy
4%
2%
1%
Frequency Bandwidth
dc
dc - 10 kHz
dc - 20 kHz
Sampling Rate
-
10/sec
10/sec
Ranges
(2)
(2)
(3)
Low Range
2 kG
200 G
300 G
     Mid Range
-
2 kG
3 kG
     High Range
20 kG
20 kG
30 kG
Resolution
Low Range
1.0 G (100 uT)
0.1 G (10 uT)
0.1 G (10 uT)
     Mid Range
-
1.0 G (100 uT)
1.0 G (100 uT)
     High Range
10 G (1 mT)
10 G (1 mT)
10 G (1 mT)
Display
LCD
LCD
LCD
Digits
3 1/2
3 1/2
3 3/4
Readings
Gauss
Tesla
GaussTesla
Ampere/Meters
GaussTesla
Ampere/Meters
Analog Output
-
-
3V F.S.
Communication Port
-
-
RS-232

 

Series 4000 Hand-held Gaussmeters

4070     *    4080     *    4090

Buy It Now !  Ordering Info
Features
  • 0.1 mG Resolution High Accuracy Three Axis Technology
  • Maintains Accuracy Regardless of Orientation
  • True RMS Measurement NIST Traceable Calibration at 50/60 Hz µT Scale (Option)
  • Complete with Deluxe Carrying Case and Battery
  • Hand-Held Portability at an Affordable Price

 
Model
4090
4080
4070
# of Axes
Three
Three
Single
Auto Ranging
Yes
Yes
No
Available Options
A, D, F20, X01,T
F50,T
F20,F50
Minimum Resolution
0.1mG
0.1mG
0.1mG
Measuring Range
0.1 to 1999 mG (std)


0.01 to 199.9 µT (opt)

0.1 - 511 mG (std)


0.01 to 51.1 µT (opt)
0.1 - 199.9 mG
Typical Accuracy Error
± (1% + 1 digit)
± (2% + 1 digit)
± (1% + 1 digit)
Frequency Response
±5%
-3 dB
50-300 Hz
30/600 Hz
40-600 Hz
25/1000 Hz
40-200 Hz
30/600 Hz
Calibration Frequency
55 Hz 
60 Hz
60 Hz *
Display
3 1/2 digit LCD
3 1/2 digit LCD
3 1/2 digit LCD
Measurement Type
True RMS
True RMS
True RMS
Battery Life (Typical)
50 Hours
40 Hours
250 Hours
Operating Temperature
-10°C to+50°C
0°C to+50°C
0°C to+50°C
Power Source
9V alkaline
9V alkaline
9V alkaline
Weight
7 oz.
5 oz.
5 oz.
Size
5.9" H
3.2" W
1.2" D

4.7" H
2.4" W
1.0" D
4.7" H
2.4" W
1.0" D

Options Summary

F20 - Extended Bandwidth This option extends the frequency response of the instrument to 20-2,000 Hz. This is useful if measurements are required for sources with high harmonic content.(*) F50 - 50 Hz Calibration For instruments for use outside of North America, this no-cost option changes the standard calibration frequency from 60 Hz to 50 Hz.A - Analog Output This option provides a buffered output for viewing the analog waveform on an oscilloscope, spectrum analyzer, or similar test equipment. This is useful for determining harmonic content and other waveform properties. (z -axis only)D- DC Output This option provides a voltage level proportional to the displayed level of the magnetic field. It is useful for driving chart recorders, data loggers, and other data acquisition equipment.X01 - Switchable Single Axis Mode This option allows users to display the vector components of the magnetic field. This option should be specified in applications that require the direction of the magnetic field to be known as well as the level.

T - Microtesla Scale Instruments ordered with this option display the magnetic field in µT (instead of mG).

mA-2000 Clamp-On Current Meter ---

 

Buy It Now !  Ordering Info

Features

  • Measures low level DC & AC currents from 0 to 2000 mA with resolution as low as 0.1mA  Basic DC accuracy of 1% of reading  True RMS measurement  Frequency range DC to 250 kHz  Built in 31/2 digit display  BNC analog output for connection to oscilloscope or recorder  Simple clamp-on operation 
  • Supplied with optional AC power adapter and hard carrying case 

Typical Applications

  • Troubleshooting 4-20 mA control loops  Isolating faults on electronic circuits 
  • Verification of power supply currents 
  • Automotive computer control diagnostics 
  • Measuring ground current 
  • Low current measurements in R&D laboratories 

About...  |  Table of Contents  | Manufacturer Index  | What's New

Send Inquiries to:

Copyright © 2006 Davis Inotek Instruments, LLC. All rights reserved.