Fluke Scopemeter Test Tools & Accessories

190C Series ScopeMeters
120 Scopemeter Test Tools
Current Probes

Fluke 190C Series Color ScopeMeters

The new ScopeMeter® 190C Series with large, high-resolution, color screen and new Digital Persistence mode give you an even better view of complex waveforms in the most demanding troubleshooting applications in the field.  In addition to the impressive capabilities of the 190 Series, the new color models offer: 

• Color for easy identification of individual waveforms. 
• Full-size, high-resolution screen for revealing more signal detail. 
• Digital Persistence for analyzing complex dynamic waveforms like on an analog scope. 
• Fast display update rate for seeing dynamic behavior instantaneously. 
• Stop-on-Trigger for storing and analyzing pre-trigger waveform data. 
• Waveform reference for visual comparisons. 
• Vpwm function for motor drive and frequency inverter applications. 

• Up to 200 MHz bandwidth 
• Up to 2.5 GS/s real time sampling 
• Connect-and-ViewTM triggering for an instant stable waveform 
• Automatic capture and replay of last 100 screens 
• Isolated inputs (1000 V CAT II/600 V CAT III) 
• 4 hours battery operation 

Fluke ScopeMeter 123 Test Tool

123/003     *    123/003S (with hard case and software)  --

  Ordering Info

Make A Full Sequence of Measurements Without Ever Having To Adjust The Tool

The Fluke 123 Industrial ScopeMeter recognizes signal patterns and automatically sets up correct triggering, to always provide a stable display of even the most complicated signals - including motor drives and control signals.
 

Fast Fault Finding with Connect-and-View™ 

The Fluke 123 features unique "single test lead does all measurements" providing intuitive ease of use. You can use one and the same set of test leads for waveform display, multiple meter readings, capacitance and resistance measurements, and continuity checking. There's no need to swap leads. 

Troubleshooting scenario: An automatic wave soldering machine shows occasional "hiccups". Printed circuit boards don't move along. What's wrong? Follow this quick sequence of tests to find the problem. 
1. Check the line power. The Fluke 123 adjusts automatically. Display AC volts. Look at the waveform. It shows distortion (harmonics) and noise. Move the test leads to the power supply. There's no need to readjust the Fluke 123. 

2. Check the DC power to the control unit. The DC voltage level is correct. The ripple appears okay and no spikes are visible, so the power supply and filters check out. 

3. Move on to the control signal from the digital board. There's no need to touch a button. The Fluke 123 sets tself up automatically. 

You can perform all of these checks while holding the test leads. No adjustments to the ScopeMeter are necessary. The display is always correct and stable. Connect-and-View™ allows for quick and reliable checks of many test points in a quick sequence with a minimum of errors. 

Battery power provides isolation from ground and delivers optimum mobility with no line cords or ground wire to get in the way of getting good measurements. 

The Fluke 123 Industrial ScopeMeter streamlines troubleshooting tasks making you and your team more efficient.

Current Probes

80i-110s Current Clamp --

• 36mm H X 231 mm L X 67 mm W, approximately 330g in weight 
• .1A to 100A DC and AC RMS continuos with a 140A peak 
• 0.05A to 100A, 3% of reading, DC to 5kHZ, 12% of reading from 5kHz-20 kHz 
• Measures two AC/DC ranges: 0-10A and 0-100A 
• DC to 100kHz usable frequency range 
• 600V RMS working voltage 
• 600V DC or AC output cable and connector to ground 
• 10 mV/Amp and 100 mV/Amp output levels 
• One year warranty 

80i-500s Current Clamp --

• 196 mm L X 66 mm W X 33 mm D, approximately 420 g in weight 
• 1A to 500A AC RMS to 700A RMS for maximum of 10 minutes 
• 100A to 500A, (2% of reading; 20A to 100A, (5% of reading; 1A to 20A, (5% of reading +0.3A 
• 5 Hz to 10 kHz usable frequency range 
• 600V RMS working voltage 
• 600V AC RMS output cable and connector to ground 
• 1 mV/Amp output levels 
• One year warranty 

i1000s Current Clamp --

• 206 mm L X 105 mm W X 48 mm D, approximately 650g in weight 
• 2A to 1000 A continuos AC Current Range (2000A peak) 
• 0.5A to 1000A, 2% of reading; 0.1A to 10A, 3% of reading, (5 mA 
• 5 Hz to 100 kHz usable frequency range 
• 600V AC RMS working voltage 
• 600V AC RMS output cable and connector to ground 
• 1 mV/Amp, 10 mV/Amp, and 100 mV/Amp output levels 
• One year warranty