 Fluke Power Quality
Fluke 434 and 435 3-Phase Power Quality Analyzers --
Model 434 also includes:
- SW43W FlukeView software
- OC4USB Serial Interface adapter/cable (USB)
|
Features:
- Complete three-phase troubleshooting tool: Measures voltage, current, frequency, power, power consumption (energy), unbalance and flicker, harmonics and inter-harmonics. Captures events like dips and swells, transients, interruptions and rapid voltage changes.
- AutoTrend: no time wasted setting up additional trend graphs while every measurement is automatically recorded. Analyzes trends using cursors and zoom function while recording continues in the background.
- System-Monitor: gives immediate insight into power system’s quality. Checks conformity to limits specified in EN50160 or to own custom limits.
- Four channels: simultaneously measures voltage and current on all three phases and neutral.
- Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically.
- Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance.
- Operates for more than 7 hours on included rechargeable NiMH battery pack.
- Extensive data analysis possibilities. Cursors and zoom can be used ‘live’ while taking the measurements, or ‘offline’ on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView software (included with Fluke 434).
- Complete package includes everything to get started: 4 current clamps, 5 voltages test leads and clips, line adapter/battery charger and hard case.
- Complies with IEC 61000-4-30 measurement standards.
- C430 Hard carrying case with clamp holders
- i400s current clamps (4x)
- TLS430 Test leads and alligator clips (4 black, 1 green)
- BP190 NiMH Battery pack (installed)
- BC430 Battery charger/line voltage adapter
- WC100 Color localization set
- Getting Started (printed)
- User Manual (CD-ROM)
|
Fluke 43B Single Phase Power Quality Analyzer --
Fluke 43B
 Ordering Info
|
Features:
- Calculates three-phase power on balanced loads from a single-phase measurement
- Measures power harmonics, and captures voltage sags, transients, and inrush currents
- Monitoring functions help track intermittent problems and power system performance
- Menus use familiar electrical terminology
- Toggle through the most commonly used power quality modes with a single keystroke
- Records two selectable parameters for up to 16 days
- 20 measurement memories to save/recall screens and data with cursor readings
- FlukeView Software can log harmonics and all other readings over time
- FlukeView Software provides a complete harmonics profile up to the 51st harmonic
- Measures resistance, diode voltage drop, continuity, and capacitance
Power Quality Analyzer includes:
- C120 Hard Case
- TL24 Test Leads
- AC20 Industrial Test Clips
- AC85 Large Jaw Alligator Clips
- TP1 Flat-tipped Slim-Reach™ Test Probes
- TP4 4 mm Round Slim-Reach™ Test Probes
- 80i-500s 500 A AC Current Clamp
- PM 9080 Optically Isolated RS232 Interface Adapter
- BP120 Rechargeable Ni-Cd Battery Pack (installed)
- PM 8907 Line Voltage Adapter/Battery Charger
- SW43W FlukeView™ Power Quality Analyzer Software for Windows® and Users Manual on CD-ROM.
- Shielded Banana-to-BNC Adapter
- Users Manual / Application Guide
- Power Quality CD-ROM
|
FlukeView®
- FlukeView Power Quality Analyzer Software (included)
- Capture measurement screens for professional-looking reports
- Log readings to your computer disk drive
- Works with Windows® word processing, spreadsheet and analysis software
- Windows® 3.1, Windows® 95 and Windows® NT compatible
Other features
- Measures resistance, diode voltage drop, continuity, and capacitance
- Records two selectable parameters for up to 16 days
- Supports temperature accessories with direct readout in degrees
- 10 measurement memories for saving screens
- 500 A ac current clamp and voltage probes with four sets of probe tips
- User's Manual, applications manual and power quality video to help answer questions
- 3 year warranty on the Fluke 43B, 1 year on accessories
Fluke VR101S Voltage Event Recorder System
Set up, plug in, download, and analyze
Homes, offices, hospitals, and factories depend on electronic devices. And electronic devices depend on good power quality. The Fluke VR101S is the perfect system for catching sags, swells, transients, outages and frequency variations on line voltage at receptacles, where the most sensitive loads are connected.
The VR101S is a starter system that includes a compact VR101 event recorder, an optical interface cable, and EventView software that turns your PC into a power quality reporting tool. Additional VR101 event recorders can be purchased individually, so you can monitor several voltage conditions at multiple locations at once.
Free Software Download
EventViewTM version 2.11 allows you to set event capture limit parameters for the VR101 Voltage Event Recorder, and download the captured event data into your PC for analysis. Download this software to see how easy it is to record and analyze voltage events.
If you have EventView software with a version number lower than 2.10, it may not be compatible with the most recent versions of the VR101 Voltage Event Recorder, so it is suggested that you upgrade your software.
|
