Fluke Carrying Cases & Accessories

---

C510 Leather Meter Case --

The C510 Meter Case is specifically designed for Flukes 70 and 20 Series meters but also accommodates most other Fluke meters, from the new top of the line 89-IV to the small, affordable 10 series, as well as a number of  Fluke thermometers and process meters.  Oiled, top grain cowhide for long life Heavy duty stitching and riveted construction Large belt loop and top flap for securing your meter.  Holds most Fluke DMMs, Thermometers and Process Meters Size (H x L x W): 4" x 11" x 7" (100 mm x 275 mm x 175 mm) 
Fluke Part No.: 1547885 

C520 Leather Tester Case --

The C520 Tester Case is designed specifically to hold either your Fluke T2 or T5 tester. Oiled, top grain cowhide for long life Heavy duty stitching and riveted construction Large belt loop and top flap for securing your tester Holds Fluke T2 and T5 Electrical Testers Size (H x L x W): 4" x 8" x 5" (100 mm x 200 mm x 125 mm) Fluke Part No.: 1547897 

C530 Leather Accessory Case --

The C530 Accessory Case can carry all your meter accessories and even has enough room inside for a meter as well. The C530 comes with a heavy-duty top zipper.  Each leather case is made in USA and is embossed with the Fluke logo.  Durable split leather for long life Rugged zipper has a convenient leather pull Ideal for storing Fluke leads, probes and other accessories. 
Even large enough to hold a meter plus accessories Size (H x L x W): 1" x 12" x 9" (25 mm x 300 mm x 225 mm) 
Fluke Part No.: 1547904 

C10 Holster --

Snap-on holster for all Series 10 meters. Absorbs shocks and protects the meter from rough handling. Built-in stand and hanger-loop allow meter positioning. Molded hanger-loop can also function as stationary probe holder, allowing one-handed operation and contact of test points. 

C70Y/G Series II Holster --

Easy-to-clean, vinyl snap-on holster absorbs shocks and protects meter. Unique Flex-StandT allows meter to hang, lean or stand for best viewing position.  Lead/probe storage on back. The C70Y is High-visibility yellow, while the C70G is grey.  For all 70 and 50 Series and Models 21, 23, 29 meters. 

C81Y/C81G Holster --

Easy-to-clean, vinyl snap-on holster absorbs shocks and protects meter. Lead and probe storage on back.  Unique Flex-StandT allows meter to hang, lean or stand in best viewing position.  For 80 Series DMMs. 

C20 Hard Case --

Heavy duty case made of shock resistant polypropylene. Top cover snaps on back to serve as tilt stand. Carrying handle and storage compartment for test leads and small accessories are part of case. For Fluke 25 and 27, also holds 80 Series meters in holsters. 

C100 Universal Carrying Case --

Tough polypropylene case provides protection against rough handling and bad weather. For any Fluke handheld DMM or Fluke 50 Series thermometers, except the Series 10 and 860 Series, and most Fluke DMM accessories. 

C700 Hard Carrying Case --

Description: Hard carrying case with custom-cut foam liner. 
Application: Cutouts to hold one documenting process calibrator, one Fluke Pressure Module, one BC7210 Battery Charger, one spare BP7217 Battery Pack, and test leads. 
Material: Exterior: Blow-molded charcoal gray polyethylene with textured surface. 
Interior: Black, die-cut polyurethane foam. 
Handle: Molded polyethylene. 

C800 Hard Storage Case --

Smaller than C100. Double seal latches resist popping open if case is dropped. Includes compartments for holding accessories and manuals. Detachable lid for easy storage. Designed for 80 Series meters in holsters. 70 Series and 21, 23, 29, 70 meters in holsters fit loosely. 

C12A Soft Case --

Soft sided, zippered, vinyl carrying case for all 10 Series meters. Inside pockets are designed to carry a meter, manual, and test leads. Convenient 3" (76 mm) belt loop accommodates tool belts. 

C25 Ruggedized Soft Case --

Large vinyl soft case with water resistant zipper and one inside pocket for test leads or small accessories. Convenient 3" (76 mm) belt loop accommodates tool belts.  For Fluke 20, 50 or 70 Series meters in C70 Holster; or 80 Series meters in C81 Holster.  Also for use with PV350. Size: 8.3" H x 4.9" L x 2.75" D (18.4 mm H x 124.5 mm L x 69.8 mm D). 

C50 Compact Soft Case --

Vinyl case with belt loop. Holds meter, manual, and leads ready for testing. For 21, 23, 29, 50 and 70 Series without holster. (Use C25 or C90 when using meter with holster.) 

C90 Soft Case --

Fabric-backed vinyl case with zippered enclosure. One internal pocket holds test leads or small accessories. Convenient 3" (76 mm) belt loop accommodates tool belts. For use with 8060A and 8062A. Also holds Fluke 21, 23, 29, 50 and 70 Series meters in a C70 holster. Smaller than a C25. 

C789 Tool Bag --

Durable, synthetic, woven fabric case protects and allows use of meter while in case. Separate internal compartments are designed to organize accessories, including spare battery. Back pouch stores manuals, and the carrying strap allows hand or shoulder use. 

C550 Tool Bag --

The C550 Tool Bag is a large contractor's bag made from tough ballistic nylon and has a steel internal frame. The C550 is weather resistant and comes with handles, shoulder strap and heavy duty hardware. With over 20 inside and outside pockets, the C550 is large enough to conveniently carry several meters, accessories and even your hard tools, including hammers, saws and screw drivers. The C550 comes in the distinctive Fluke yellow and black color and proudly carries the Fluke logo. Rugged ballistic cloth with internal metal frame Heavy duty hardware includes a removable shoulder strap Over 20 inside and outside pockets and a zippered main compartment Water resistant Ideal for carrying all your Fluke tools and accessories Size (H x L x W): 13" x 20" x 9" (325 mm x 500 mm x 225 mm) Fluke Part No.: 1547919 

LPAK80-4 Lock Pack --

Don't let your new Fluke meter walk away!  Now you can take long-term, unattended measurements without the fear of your meter being "borrowed".  LPAK80-4 is a new security accessory that fits into the back of a Fluke 180 Series Digital Multimeter.  The LockPak accessory easily fits into the back of the meter, once the rubber probe holder is removed.  When combined with a cable and padlock, the meter is secured in place to reduce the threat of theft or loss. Made of polycarbonate, the LPAK80-4 is very durable and should last for years.  LPAK80-4 is designed for use similar to lockout, tagout procedures, and is especially useful for long term, unattended logging situations with the Fluke 180 Series Digital Multimeters.  So don't let your new Fluke meter walk away.  Be sure to purchase a Fluke LPAK80-4 accessory. 

TPak Hanging Kit --

TPAK™ is designed to work with: 180 Series Digital Multimeters 80 Series IV Digital Multimeters 70 Series III Digital Multimeters 50 Series II Digital Thermometers 725 Multifunction Calibrator Now you can hang your meter almost anywhere with the new Fluke TPAK accessories kit. TPAK includes a universal hanger, a magnet, and 9-inch (43 cm) and 17-inch (23 cm) "hook-and-loop" hanger straps. The universal hanger is designed to fit into the special module on the back of the meter. The universal hanger allows you to hang your meter on a nail, hook or other object. You can add a piece of rope, flexible wire or cable to hang the meter in almost any position. The 9-inch (43 cm) and 17-inch (23 cm) hook-and-loop straps are used with Fluke's universal hanger to wrap around and connect to a pipe, beam or any other convenient support structure. And finally, the special magnet accessory is designed to connect to either of the straps. The strong magnet accessory will attach to an electrical panel, a metal doorjamb or any other ferrous-type metal. With the universal hanger, two hook-and-loop straps and the magnet, TPAK solves almost any hanging and positioning problem you may face with your meter. Call your local Fluke distributor and ask for the TPAK accessory kit.