Flowline Level Controllers

This AC powered controller is offered in both level and flow switch configurations. The LC10-1002 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The integral flash alarm brings attention to process alarm conditions. The LC30-1002 flow switch controller is commonly used as a low flow shut off for pump or process protection with a single sensor. The general purpose, NEMA 4X controller mounts on any sensor or fitting assembly.

Ordering Info

• Supply voltage:  120 / 240 VAC, 50 - 60 Hz. 
• Consumption:  5 watts 
• Sensor supply:  13.5 VDC @ 27 mA 
• Relay type: 
• LC10-1001: (1) SPDT 
• LC10-1002: (1) SPDT 
• LC11-1001: (1) Latched SPDT 
• Configuration: 
• LC10-1001: 1. Fill or Empty 2. High or low alarm 
• LC10-1002: High or low alarm 
• LC11-1001: High or low alarm 
• Relay load:  250 VAC, 10A, 1/2 hp. 
• Relay mode:  Selectable, NO or NC 
• Time delay:  0 to 60 seconds 
• LED indication:  Sensor, relay & power status 
• Fail safety:  Power fail-safe 
• Temperature range: 
• F: -40 degrees to 158 degrees 
• C: -40 degrees to 70 degrees 
• Enclosure rating:  NEMA 4X (IP65) 
• Enclosure material:  Polypropylene (U.L. 94 VO) 
• Enclosure rotation:  300 degree swivel base 
• Conduit connection:  1/2" NPT 
• Certificate number:  LR 79326-3 
• CE compliance:  EN 50082-2 immunity   EN 55011 emission   EN 61010-1 Safety 
• Flash Alarm (Included with LC10-1002) 
• Flash type:  Xenon tube 
• Flash frequency:  1 per second 
• Strobe life:  10M cycles 
• Supply voltage:  120 VAC (240 VAC), 50 - 60 Hz. 
• Consumption:  5 Watts 
• Material:  Polycarbonate 
• Enclosure rating:  NEMA 4X / IP65

This AC powered controller is offered in both level and flow switch configurations. The LC10-1001 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The LC30-1001 flow switch controller is commonly used as a low flow shut off for pump or process protection with a single sensor. The general purpose, NEMA 4X controller mounts on any sensor or fitting assembly.

• Supply voltage:  120 / 240 VAC, 50 - 60 Hz. 
• Consumption:  5 watts 
• Sensor supply:  13.5 VDC @ 27 mA 
• Relay type: 
• LC10-1001: (1) SPDT 
• LC10-1002: (1) SPDT 
• LC11-1001: (1) Latched SPDT 
• Configuration: 
• LC10-1001: 1. Fill or Empty 2. High or low alarm 
• LC10-1002: High or low alarm 
• LC11-1001: High or low alarm 
• Relay load:  250 VAC, 10A, 1/2 hp. 
• Relay mode:  Selectable, NO or NC 
• Time delay:  0 to 60 seconds 
• LED indication:  Sensor, relay & power status 
• Fail safety:  Power fail-safe 
• Temperature range: 
• F: -40 degrees to 158 degrees 
• C: -40 degrees to 70 degrees 
• Enclosure rating:  NEMA 4X (IP65) 
• Enclosure material:  Polypropylene (U.L. 94 VO) 
• Enclosure rotation:  300 degree swivel base 
• Conduit connection:  1/2" NPT 
• Certificate number:  LR 79326-3 
• CE compliance:  EN 50082-2 immunity   EN 55011 emission   EN 61010-1 Safety 
• Flash Alarm (Included with LC10-1002) 
• Flash type:  Xenon tube 
• Flash frequency:  1 per second 
• Strobe life:  10M cycles 
• Supply voltage:  120 VAC (240 VAC), 50 - 60 Hz. 
• Consumption:  5 Watts 
• Material:  Polycarbonate 
• Enclosure rating:  NEMA 4X / IP65

This compact junction box is offered in both large and small configurations for use with our level or flow switches.  The LC05-1001 junction box is commonly used for the integral wiring termination of multiple level switches installed on the Smart Trak fitting.  The LC06-1001 junction box is commonly used for the integral wiring termination of a single level or flow switch.  The rugged NEMA 4X enclosure includes a 300 degree swivel base for fast and easy conduit alignment.

• Sensor Input:  LC05: 1-6 sensors 
• LC06:  1-3 sensors 
• Terminal strip:  LC05: 12 pole socket 
• LC06:  6 pole socket 
• Max.current capacity:  26 amp 
• Max. voltage:  380 V. 
• Wire Gauge:  22-14 AWG Cu (copper) 
• Enclosure rating:  NEMA 4X (IP65) 
• Enclosure material:  Polypropylene, (U.L. 94 VO) 
• Enclosure rotation:  300 degree swivel base 
• Temperature range: 
• F: -40 degrees to 158 degrees 
• C: -40 degrees to 70 degrees 
• Conduit connection:  1/2" NPT 

 

This AC powered controller is offered in both level and flow switch configurations. The LC40-1001 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The LC80-1001 flow switch controller is commonly used as a low flow shut off for pump or process protection with a single sensor. The general purpose controller mounts on a 35mm DIN rail or panel type installation.

• Supply voltage:  120 VAC (240 VAC), 50 - 60 Hz. 
• Consumption:  5 Watt 
• Sensor inputs: 
• LC42: 1-3 sensors 
• LC41: 1-2 sensors 
• LC40: 1 sensor 
• Sensor supply:  13.5 VDC @ 27 mA 
• Relay type: 
• LC42: (1) SPDT, (1) Latched SPDT 
• LC41: (1) Latched SPDT 
• LC40: (1) SPDT 
• Relay rating:  250 VAC, 10A, 1/2 hp. 
• Relay mode:  Selectable, NO or NC 
• Relay latch:  ON or OFF 
• Time delay:  0 to 60 seconds 
• LED indication:  Sensor, relay & power status 
• Fail safety:  Power fail-safe 
• Temperature range: 
• F: -40 degrees to 158 degrees 
• C: -40 degrees to 70 degrees 
• Enclosure rating:  35 mm DIN (EN 50 022) 
• Enclosure material:  Polypropylene (U.L. 94 VO) 
• Certificate number:  LR 79326-3 
• CE compliance:  EN 50082-2 immunity  EN 55011 emission  EN 61010-1 safety 

 

For hazardous applications, package the isolation relay controller with our intrinsically safe level switches. The LC90-1001 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The controller has a built-in intrinsic safety barrier and is approved for use with Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III applications. The isolation controller mounts on a 35 mm DIN rail or panel type installation.

• Supply voltage:  120 VAC (240 VAC), 50 - 60 Hz. 
• Consumption:  5 Watt 
• Sensor inputs: 
• LC92: 1-3 sensors 
• LC91: 1-2 sensors 
• LC90: 1 sensor 
• Sensor supply:  13.5 VDC @ 27 mA 
• Relay type: 
• LC92: 1. Fill or Empty with Alarm 2. High and Low Alarm 
• LC91: 1. Fill or Empty 2. High or Low Alarm 
• LC90: 1. High or Low Alarm 
• Relay type: 
• LC92: (1) SPDT, (1) Latched SPDT 
• LC91: (1) Latched SPDT 
• LC90: (1) SPDT 
• Relay rating:  250 VAC, 10A, 1/2 hp. 
• Relay mode:  Selectable, NO or NC 
• Relay latch:  ON or OFF 
• Time delay:  0 to 60 seconds 
• LED indication:  Sensor, relay & power status 
• Fail safety:  Power fail-safe 
• Temperature range: 
• F: -40 degrees to 158 degrees 
• C: -40 degrees to 70 degrees 
• Enclosure rating:  35 mm DIN (EN 50 022) 
• Enclosure material:  Polypropylene (U.L. 94 VO) 
• CSA approval:  Class I, Groups A,B,C & D;  Class II, Groups E, F & G;  Class III 
• CSA entity parameters:  Voc = 17.47 VDC  Isc = 0.4597 A  Ca = 0.494 µF  La = 0.119 mH 
• Certificate number:  LR 79326-3