Available in compact 1/32 and 1/16 DIN panel sizes, the 2100 series uses advanced PID algorithms to give stable ‘straight line’ temperature control.  Self tuning is included to optimize the control performance without the need for specialized knowledge or training.

The operator interface can be customized to present only those parameters that an operator needs to see and adjust, while all other parameters are locked away under password protection. 

Heater failure can be detected when the controller is used with a TE10S Solid State Relay.  Tactile buttons ensure positive operation. 

An optional external output module can be ordered to convert the logic output to a relay. An external precision resistor input adapter can accept 4-20mA process inputs.

Ramp-dwell programming 
Simple baking profiles can be programmed using the built in setpoint ramp generator and dwell timer.

Supply voltages: 
 

Operating ambient: 

Inputs: 

Output ratings: 

85-264Vac, 5.0watts maximum
20-29Vac or dc, 5.0watts maximum

0-55°C, 0-90%RH non-condensing

Nine standard thermocouple types. Pt100. 4-20mA linear. Custom input available

2

Available in 1/16, 1/8 and 1/4 DIN panel sizes the 2200e series are configurable for PID, On/ Off or motorized valve control for heat only or heat/cool applications, satisfying both electrical and gas heating requirements.  Self-tuning and customized cooling algorithms are included to optimize control performance.  These units employ patented INSTANT ACCURACY™ technology on scaleable universal inputs accepting nine standard thermocouple and RTD inputs, DC process inputs or downloadable custom inputs.
 

Digital communications with Modbus® RTU or DeviceNet™ protocols are available for easy con- nection to PLC™ or PC based supervisory control and data logging systems.

A simple ramp and hold profile can be programmed using the internal ramp generator and dwell timer. With custom cooling algorithms, these controllers are ideal for plastics extrusion. Eliminate ammeters using PDSIO® current monitoring facility. Heater current may be displayed and open and short circuit faults detected and alarmed. 

Supply voltages: 

Operating ambient: 

Inputs: 

Output ratings: 
 
 
 

Communications: 

85-264VAC, 10.0 watts maximum 

0-55°C, 0-90%RH non-condensing

Nine standard thermocouple types. Pt100. 4-20mA linear. Custom input available

Relay: 2A, 264Vac resistive 
Logic: 18Vdc, 20mA 
Triac: 1A, 264Vac resistive 
DC: Isolated 0-20mA, at 12Vdc

Modbus®, ASCII, DeviceNet™ 

The 2416 is a high stability programmable controller with an extensive range of options. Either PID, on/off or motorized valve control can be configured, for electrical and gas heating applications.  Dual PID settings, advanced ‘one shot’ and continuously adaptive tuning are available.

Multi-zone programming can be implemented using PDSIO® retransmission to deliver a master setpoint to one, two, or three client controllers, with holdback from any client if the temperature deviates from the setpoint by more than a set value. 

Up to four setpoint programs can be stored with 16 ramp-dwell segments and up to three event outputs.

Eliminate ammeters using PDSIO® current monitoring facility. Heater current may be displayed and open and short circuit faults detected.
 
 
 
 
 

 Supply Voltages: 
 

 Operating Ambient: 

 Panel Sealing:

 Communications: 

 Inputs: 
 

 Output Ratings: 
 

85-264Vac, 15watts maximum 
20-29Vac/dc, 15watts maximum

0-55°C, 0-90%RH non-condensing

IP65, plug-in

Modbus RTU, Ei-Bisynch ASCII

Nine standard thermocouple types. Pt100. 4-20mA linear (1% sense resistor supplied, 0.1% 2.49 resistor available (order SUB2K/249R.1). Custom input available.

Relay: 2A, 264Vac resistive 
Logic: 18Vdc, 20mA 
Triac: 1A 264Vac resistive 
DC: 0-20mA or 0-10Vdc configurable 

Available in 1/16, 1/8 and 1/4 DIN panel sizes, the 2400 series are high stability controllers with an extensive range of options. Either PID, on/off or motorized valve control can be configured, satisfying both electrical and gas heating applications. Dual PID settings, advanced ‘one shot’ and continuously adaptive tuning are available to optimize control performance. 

The controllers employ universal inputs with Instant Accuracy™ and accept a range of plug-in modules for heating, cooling, analog retransmission, second process value input and remote setpoint. High speed Modbus® RTU, Profibus® DP, DeviceNet™, and Ei-Bisynch ASCII digital communications provide easy connection to PLC™, PC based supervisory control and data logging systems.

One, four or 20 setpoint programs can be stored with 16 ramp-dwell segments and three or eight event outputs.  Eliminate ammeters using PDSIO® current monitoring facility.  Heater current may be displayed and open and short circuit faults detected.

Ideal For: 

• Single and multi-zone ovens, furnaces, and kilns 
• Environmental chambers 
• PID, valve, ratio, and cascade control 
• Setpoint programming 
• High speed communications and PDSIO® 

 Supply Voltages: 
 

 Operating Ambient: 

 Panel Sealing: 

 Communications: 

 Inputs: 
 

Output Ratings: 

85-264Vac, 15watts maximum 
20-29Vac/dc, 15watts maximum 

0-55°C, 0-90%RH non-condensing

IP65, plug-in

Modbus® RTU, DeviceNet™, Profibus® DP, Ei_Bisynch ASCII 

Nine standard thermocouple types. Pt100. 4-20mA linear (1% sense resistor supplied, 0.1% 2.49 resistor available. Order SUB2K/249R.1). Custom input available 

Relay: 2A, 264Vac resistive 
Logic: 18Vdc, 20mA 
Triac: 1A 264Vac resistive