Contact the closest office: 1-800-358-5525
Contact the closest office: 1-800-358-5525 |
|
 Ideal For
|
Both models include an optional alarm relay output and logic connection
for either a second external alarm relay or alarm acknowledge input.
The universal input employing patented Instant Accuracy™ technology accepts a wide range of two wire temperature sensors and process inputs. An optional external output module can be ordered to convert the logic
output to a relay. An external precision resistor input adapter can
accept 4-20mA process inputs.
Features:
|
| Display:
Supply voltage: Operating ambient: Panel Sealing: Inputs: Sample rate: Relay output rating: |
Green four digit 10mm LED
85-264Vac 20-29Vac/dc, 15watts maximum 0-55°C, 5-95%RH non-condensing NEMA 4X, IP65, plug-in nine standard thermocouple types, Pt100, Linear mV/mA 5Hz 2A, 264Vac resistive |
 The 2108i provides accurate four digit measurement and display of temperature and other process variables in a standard 1/8 DIN horizontal format. Two alarm relay outputs are provided from up to three internal soft alarms. External digital keylock and alarm acknowledge inputs are standard. The 2108i employs patented Instant Accuracy™ technology and accepts outputs from all popular temperature, pressure, flow and level measurement sensors. |
Ideal For
Features:
|
| Display:
Supply voltage: Operating ambient: Panel Sealing: Inputs: Sample rate: Output ratings: |
Red or green four digit 15.9mm LED
100–240Vac 15%, +10% 0-55°C, 5-95%RH non-condensing IP65, plug-in nine standard thermocouple types, Pt100,Linear mV/mA 5Hz Relay output rating: 2A, 264Vac resistive |
 Accurate stable measurement of temperature, pressure, level, flow and
other process variables are provided by the 2408i universal indicator.
An optional second process value input allows the average, difference,
minimum or maximum of two values to be displayed.
Strain gauge and presssure sensor inputs can be energized from an internal
5 or 10Vdc supply. An automatic calibration routine is provided to
remove zero and span offsets.
|
For flow measurements, square root extraction is available as standard.
The 2408i employs patented Instant Accuracy™ technology in its universal input. Large bright red or green displays ensure good visibility in high or low ambient lighting conditions. Features:
|
 The 2208e and 2204e FM alarm units have two FM compliant, alarm relay outputs fitted as standard. In addition they has two optional outputs 1 and 2. Output 1 can be fitted with either: dc retransmission of PV, an additional alarm relay output, or an alarm acknowledgement input. Output 2 can be fitted with an additional, non–FM compliant alarm relay output. A communications option is also available. The FM compliant relay outputs are configurable as absolute high or low alarms. They are fixed as latching alarms, de-energised in the alarm state. It is not possible to configure them otherwise. |
Universal Input A universal input circuit employing patented Instant Accuracy™ technology with an advanced analog to digital convertor samples the input and continuously corrects it for drift. This gives high stability and rapid response to process changes. High noise immunity is achieved by rejection of 50/60Hz pick-up and other sources of noise. The input covers all thermocouple types, Pt100 RTD linear millivolts or milliamps or DC volts. Input filtering from 1.0 to 999.9 seconds is included. Features:
|
About... | Table of Contents | Manufacturer Index | What's New Send Inquiries to: |
Eurotherm
Controls