 Druck
SI Pressure Instruments Pressure Pumps / Test Equipment
Low Pressure Test Pump LTP1
-1 to 3bar / 45psi Pneumatic Pressure and Vacuum
- Pressure release valve
- Fine adjustment valve
-
Two Push fit connectors to take 4mm OD tubes to item under test
-
Pressure / Vacuum selector
- Dual source of pneumatic pressure and vacuum.
- Fully portable hand operated unit.
-
Generating up to 3000 mbar, 45psi pressure or -850 mbar, 25 in Hg vacuum
-
Quick fit instruments are available to use with the system including electronic
calibrators, digital indicators and analog gauges
-
The LTP1 is supplied in a light, high quality plastic carrying case, with
hoses, adaptors, seals and provision for additional instruments
|
 Ordering Info
|
SLTP1-K Pneumatic Pump and Vacuum (30psi to -25inHg),
5 piece adapter fittings and hose kit
Pressure Test System TP1-40
-1 to 40 bar / 600 psi Pneumatic Pressure and Vacuum
- Dual source of pneumatic pressure and vacuum.
- Fully portable hand operated unit supplied as a complete kit.
- Generating up to 40 bar pressure or -0.960 bar / 29 in Hg vacuum.
- Adjustable stroke to provide over pressure protection.
- Quick fit instruments are available to use with the system including electronic
calibrators, digital indicators and analog gauges.
- The TP1- 40 is supplied in a light, high quality carrying case, with adaptors,
a set of washers, seals and provision for additional instruments.
|
Ordering Info
The TP1 Pressure Test System can be used for calibration checks on
pressure transmitters, pressure switches, indicators, recorders and controllers.
|
STP1-40-K Pneumatic Pump and Vacuum (600psi to -28inHg),
5 piece adapter fittings and hose kit
HTP1 Pressure Test System
1,000 bar / 15,000 psi Hydraulic Pressure (compatible with most fluid media)
-
Hydraulic Pressure up to 10,000 psi / 15,000 psi (700 bar / 1,000 bar)
- Sealed Construction- NO LEAKS! NO RUST!
- Lightweight, hand held and easy to use.
- Optional over pressure protection system (via adjustable relief valve)
- Quick priming and pressure generation using scissor action pump.
- High pressure / priming selector.
- Fine adjustment control.
- Pressure release valve.
- Large see-through reservoir with a capacity of over 100cc.
- Compatible with many different liquids. e.g. mineral oil, distilled water.
('Skydrol' / Brake fluid option also available).
- Optional accessories include a carrying case, a set of adaptors and a flexible
hose with quick fit connectors suitable for many applications.
|
Ordering Info
HTP1-700 and HTP1-1000 are lightweight, easy to use, and can generate
pressures up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi.
|
SHTP1-700-K Hydraulic Pump (10,000psi), 7 piece
adapter fittings and hose kit
SHTP1-1000-K Hydraulic Pump (15,000psi), 7
piece adapter fittings and hose kit
PC6Pro Pressure Calibrator Head
| The PC6 Pro Pressure Calibrator combines the latest developments in
pressure instrumentation with advanced sensor and component technology
to offer a versatile calibration instrument.
It is designed for accurately testing and calibrating the following
types of instruments:
- Pressure Transducers / Transmitters
- Pressure Switches / Relief Valves
- Pressure Indicators (analogue / digital)
- Process Indicators
- Current / Voltage to Pressure Converters
|
Ordering Info
|
The PC6 Pro can be purchased with our hand held pumps:
PC6Pro head with LTP1 Low Pressure Pneumatic test system
-1 to 2 bar (-30inHg to 30 psi)
PC6Pro calibrator head with TP1 Pneumatic pressure test
system -1 to 25 bar (-30inHg to 360 psi)
PC6Pro calibrator head with HTP1 Hydraulic pressure
test system to 1000 bar (0 to 15,000 psi)
PC6 Extra Pressure Modules
| The EPM is an intelligent module which contains a pressure transducer,
temperature sensor, analog to digital converter, and the necessary calibration
data stored during EPM calibration.
During operation the EPM sends pressure and temperature related information
digitally to the PC6 which acts as an intelligent terminal.
The EPM or the PC6 internal pressure sensor can be selected during calibration
using the calibrator menu system.
|
The EPM has been developed to work in conjunction with the PC6 Pressure
Calibrator to provide additional pressure ranges without incurring the
full cost of extra calibrators. |
DPM Pressure Module
- Low cost, small and portable
- Pressure measurement range -1 to 1000 bar (15000 psi)
- Menu driven software to produce calibration certificates
- Maximum, Minimum, % of set limits and Tare value display functions
-
Leak rate measurement 1 second to 999 days
- Resolution variation facility
- Timed/Event Data logging on a PC or Printer
- Zero & Span Calibration facility using PC.
- Multi Language - English, French, German, Italian, Spanish.
-
'CE' marked
|
The DPM has been developed to work in conjunction with a PC or intelligent
terminal. |
|
