Ashcroft Pressure Transducers

A2 Heavy Industrial and Hazardous Locations Pressure Transmitters

  Ordering Info

Choice of 1.0, 0.5 or 0.25% accuracy  Pressure ranges from 5 psi through 10,000   psi  CE mark is standard  17-4 pH and 316L SS sensors available  304 SS case in standard, welded or  explosion proof construction (UL listed)  Six output signals to choose from  Optional absolute pressure ranges available  Available externally adjustable zero and span access  FM, CSA and ATEX listings pending

Type KM10 Rugged, Compact Transducer for High Volume OEM

Compact size  All welded sensor  -40/120 Deg. C operating temperature  Rugged SS construction  IP67 ingress rating  Ranges through 7500 psi

K1 Thin Film PressureTransducer / Transmitter --

  Ordering Info

Superior long term stability and reliability Many standard electrical and pressure connections Calibration report available FM approved for intrinsic safety (optional) Accuracy: ±.5% or ±1.0% F.S. (terminal point) Standard ranges (PSI): 0/15 PSI thru 0/20,000 PSI with vacuum and compound ranges available Output signal: 4-20 mA (2 wire), 1-5VDC (3 wire), 1-6 VDC (3 wire), 0-5VDC (4 wire). Optional scaling available upon request Power requirements: 10-30VDC unregulated, 24 VDC nominal reverse polarity protected (4-20 mA)

K2 Thin Film Pressure Transducer --

Superior long term stability and reliability Calibration report available Many standard electronic and pressure connections Accuracy: ±.5%, or ±1.0% F.S. (terminal point) Standard ranges (PSI): 0/.5 PSI thru 0/20,000 PSI with vacuum and compound ranges available Output signal: millivolt, sensitivity 2mV/V, 3mV/V, 10mV/V, 20mV/V; Optional sensitivities available upon request Power requirements: 5-10 VDC standard

Type K8 Thin Film Pressure Transducer --

Superior long term stability and reliability Small size Calibration report available Accuracy: ±.5 or ±1.0% F.S. (terminal point) Standard ranges (PSI): 0/45 thru 0/20,000 PSI Bridge resistance: 3500 ohms (nominal) Zero offset: ±1 mV/VDC Sensitivity: varies with pressure range, for example 6mV/V @ 45 PSI, 12 mV/V @ 100 PSI, output proportional to supply voltage Excitation: 5-10 VDC Offers the benefits of polysilicon thin film performance at affordable prices

V2 Pressure Transmitter  ---

True 1% interchangeability from unit to unit - laser trimmed technology  Fused silicon for superior linearity and repeatable performance  Extremely high proof and pressure tolerance  Reverse polarity protected  Wide operating range of -40° to +250° F  EMI/RFI protected - IEC 801-3  Natural gas vehicle systems approvals available; compliant to NGV 3.1

KS Sanitary Pressure Transmitter  ---

Superior long-term stability and repeatability  Stainless steel NEMA 4X enclosure  Current/voltage/millivolt output  Wide range of electrical connections available  All-welded construction  316L stainless steel electropolished diaphragm

---

Duratran® Transmitter Type 2288, Accuracy (±1.0%) ---

Ideal transmitter for tank level applications available in vacuum, compound and a variety of zero based ranges Adapts easily to Viton diaphragm seals that are commonly used in tank level applications in water, process, and pulp/paper applications ±1.0% of full scale accuracy Ranges from 10 in H2O to 10 PSI 4-20mA, 2 wire output Zero and span adjustments Easily adapts to Ashcroft Viton® diaphragm seal Local indication in engineering units

Duratran® Transmitter Type 2279, Grade 2A (±0.5%) ---

  Ordering Info

General purpose electronic indicating pressure transmitter suitable for aggressive environments and process fluids Combines the outstanding quality and craftsmanship of the Duragauge with state-of-the-art solid state photo-optic technology that offers long term stability and reliability ±0.5% of full scale accuracy Ranges from 12 to 20,000 PSI 4-20mA, 2 wire output Zero and span adjustments FM approved as intrinsically safe 4 1/2" solid front phenolic case