Amprobe Wire Tracing
Systems
AT4001 * AT4003 * AT4004 * AT4005
 Ordering Info
-
4 models to choose from
-
One universal transmitter- automatically switches
to work with either energized or non-energized systems
-
Receiver not position sensitive- does not
need to be rotated in order to provide accurate readings
-
Traces live wires buried or hidden behind
walls
-
Traces energized and non-energized (open,
broken) wires
-
Performs tests without having to interrupt
power
-
Locates breakers, neutrals, and ground lines
-
Locates and traces wires in walls, floors,
conduit, computer cables, etc.
-
Pinpoints shorts, ground faults and broken
wires
-
Does not interfere with sensitive electronic
equipment
-
Battery Booster stengthens signal for open
tracing
-
Clamp-on attachment injects signal for non-contact
operation
|
|
AT-4005 (Shown)
Includes the Hard Carrying Case, R4000
receiver, T4000 transmitter, A2201 clamp, C2901 and C2902 cordsets, MTL-G
Grounding Test Lead 25-ft, VRC-320 Alligator Clip for Ground Lead, A2202
Clamp-on Transmitter Accessory, and manual.
-
Locates and traces wires in walls, floors,
conduit, computer cables, etc.
-
Pinpoints shorts, ground faults and broken
wires
-
Traces energized and non-energized (open,
broken) wires
AT-4001
Kit Contains: Soft Carrying Case, R4000
receiver, T4000 transmitter, A2201 clamp, C2901 and C2902 cordsets, MTL-G
Grounding Test Lead 25-ft, VRC-320 Alligator Clip for Ground Lead, and
manual.
AT-4003
Kit Contains: Hard Carrying Case, R4000
receiver,
T4000 transmitter, A2201 clamp, C2901 and C2902 cordsets, MTL-G Grounding
Test Lead 25-ft, VRC-320 Alligator Clip for Ground Lead, and manual.
AT-4004
Kit Contains: Hard Carrying Case, R4000
receiver, T4000 transmitter, A2201 clamp, C2901 and C2902 cordsets, MTL-G
Grounding Test Lead 25-ft, VRC-320 Alligator Clip for Ground Lead, A2202
Clamp-on Transmitter Accessory, and manual.
ACCESSORIES AND REPLACEMENTS
|
ATGC-1 AT-2000 Ground
Coil™ Accessory --
-
Trace and locate buried conductors like Highway
Lighting Conductors, Main
-
Electrical Feeds, Water Mains, Gas Mains,
and Telephone Lines
-
Low Cost
-
Eliminates Direct Connection of Transmitter
-
No access to the conductor required
|
|
B2024 Battery Booster
--
-
24 V Nicad rechargeable battery for the T2200,
will triple its output. For use on runs over one mile or when using the
A2201 on runs over 200 ft. The B2025 recharger works in conjuction with
the B2024.
-
Weight: 19 oz.
-
Fuse: Internal self resetting
|
|
B2025 Recharger/Converter
--
-
115VAC/24VDC Converter can be used to recharge
the B2024 (allow 8 hours) or directly boost the T2200.
Note: The AT series is covered by one or more
U.S. patents; 5,413,499; D356,039; D355,618; D355,619;
5,338,228. Other U.S. & foreign patents pending. |
| |
The R-4000 Receiver
--
Detectors: Electromagnetic coil array pickup
for short mode.
Electrostatic plate pickup for open mode.
Sensitivity: Low and High programmable
gain from traced wire
Short Mode Performance: Over 20’ in air
under test conditions.
Open Mode Performance: Over 12’ in air
under test conditions
50Hz, 60 Hz, and 400Hz Rejection: 120dB
Power Source: 9V alkaline battery
Display: 10 LED’s
Case: Flame Retardant ABS |
| |
T-4000
TRANSMITTER
Operating Frequency: 32.768 KHz
Duty Cycle: Transmits 2 pulses with a
duration of 0.0625 sec. each every 0.5 second.
Signal Output: 9V Supply
High Setting: 0.74V AC
Medium Setting: 0.61V AC
Low Setting: 0.53V AC
Fuse: Fast acting 250mA @1000V
Battery: 9V alkaline, 24V jack will accept
battery pack accessory (B2024 or B2025)
Case: Flame retardant ABS
General:
Operating Temperature: 0 to 120°F
Storage Temperature: -40 to 150°F
Case Material: ABS
Case Size: .55" x .26" |
|
A2202 Clamp-on Transmitter
Accessory --
Comes standard with the:
AT-4005 Advanced Wire Tracer
AT-4004 Advanced Wire Tracer
|
AT 2001 * AT 2002 * AT 2003 * AT 2004 * AT 2005
Ordering Info
Designed to handle the majority of tracing
applications, the AT-2000 series of Advanced Tracers combine 15 years of
experience and three different technologies into one multi- purpose instrument.
Economically priced, fully portable and easy to use, the AT-2000 series
has the following capabilities:
-
5 models to choose from
-
Trace live conductors buried up to 13 feet.
-
Trace and identify load-side equipment from
the circuit breaker while energized.
-
Trace line-side wiring without power interruption
on circuits from 9 to 600 volts AC or DC
-
Trace open wires for over a mile
-
Trace wire in conduit or, even the conduit
itself
-
Locate ground faults and shorts
-
Identify individual wires in a bundle
-
All units are fully fused protected and intrinsically
safe.
|
|
AT-2005 (Shown)
Includes the R2000 receiver, S2600 load
signal generator, T2200 trans- mitter, A2201 clamp, C2901 and C2902 cordsets,
AD-1 adapter, B2024 battery booster, B2025 recharger/converter, and Instruction
Book P/N 937775.
-
Traces live wires buried or hidden behind
walls up to 13 feet deep
-
Traces unenergized and open (broken) wires
-
Performs tests without having to interrupt
power
-
Supplied with Battery Booster to strengthen
signal for open tracing
AT-2001
Kit contains:R-2000 Receiver, S-2300 Transmitter
9-300V, C2901 Cordset 110 Volt Plug to Banana Plugs,
and Manual.
AT-2002
Kit Contains: R-2000 Receiver, S-2600
Transmitter 9-600V, C2901 Cordset 110 Volt Plug to Banana Plugs, and Manual.
AT-2003
Kit Contains: R-2000 Receiver, T-2200
Transmitter for open tracing, C2902 Cordset Alligator Clips to Banana Plugs,
and Manual.
AT-2004
Kit Contains: R-2000 Receiver, S-2600
Transmitter 9-600V, T-2200 Transmitter for open tracing, A-2201CE Clamp-on
attachment, C2901 Cordset 110 Volt Plug to Banana Plugs, C2902 Cordset
Alligator Clips to Banana Plugs, and manual.
ACCESSORIES AND REPLACEMENTS
|
|
ATGC-1 AT-2000 Ground
Coil™ Accessory --
-
Trace and locate buried conductors like Highway
Lighting Conductors, Main
-
Electrical Feeds, Water Mains, Gas Mains,
and Telephone Lines
-
Low Cost
-
Eliminates Direct Connection of Transmitter
-
No access to the conductor required
|
|
|
B2024 Battery Booster
--
-
24 V Nicad rechargeable battery for the T2200,
will triple its output. For use on runs over one mile or when using the
A2201 on runs over 200 ft. The B2025 recharger works in conjuction with
the B2024.
-
Weight: 19 oz.
-
Fuse: Internal self resetting
|
|
|
B2025 Recharger/Converter
--
-
115VAC/24VDC Converter can be used to recharge
the B2024 (allow 8 hours) or directly boost the T2200.
Note: The AT series is covered by one or more
U.S. patents; 5,413,499; D356,039; D355,618; D355,619;
5,338,228. Other U.S. & foreign patents pending. |
|
The R2000 Receiver
--
...has two detectors in its tip which are
tuned to pick up the electro-
magnetic signals (‘short’ mode) or electrostatic
signals (‘open’ mode) generated by the
other components. The LED’s and sensitivity
settings indicate the relative signal strength to allow easy detection
of the signal source. The R2000 is included in each of the five systems:
AT-2001 through AT-2005.
R2000 Receiver
Detectors: Electromagnetic coil pickup
for short mode.
Electrostatic plate pickup for open mode.
Sensitivity Selection: x1, x10, x100 coarse
gain adjustment; 0-10 fine adjustment
Short Mode Performance: Over 20’ in air
under test conditions.
Open Mode Performance: Over 12’ in air
under test conditions
60 Hz Rejection: 120dB
Power Source: 9V alkaline battery (Amprobe
model
MN-1604)
Display: 10 LED’s with chroma filter lens
Case: Flame Retardant ABS 911
Note: The AT series is covered by one or
more U.S. patents; 5,413,499; D356,039; D355,618; D355,619; 5,338,228.
Other U.S. & foreign patents pending. |
|
The LOAD
SIGNAL GENERATOR S2600 ----when connected to an energized
line, will draw a rapidly fluctuating current pulse from the source, causing
the power line to emit an electromagnetic signal which is detected by the
R2000 Receiver in the ‘short’ mode. These devices allow tracing of line-side
conductors without power interruption or interference. The S2600 accepts
9-600V AC or DC and comes with the AT-2002, 2004, and AT-2005.
Operating Voltage:
9-600 volts AC or DC
Operating Frequency: 32.768 KHz
Duty Cycle: Transmits 2 pulses with a
duration of 0.0625 sec. each every 0.5
second
Current Output -
Low Mode: 35mA peak, 4mA average
High Mode:70mA peak, 6mA average
Fast acting 250mA @660V
(6mm x 32 mm)
Cat. no. 660.25-6X32
Case: Flame retardant ABS 911 |
|
The T2200
TRANSMITTER --- injects a signal into
an unenergized conductor. If the conductor is broken (open), no current
will flow, so the signal is present as a voltage pulse, which is detected
along the conductor’s length by the R2000’s electrostatic detector (‘open
mode’). The signal will stop at the open. The T2200 comes with the
AT-2003, AT-2004, and AT-2005
T2200 Transmitter
Operating Frequency: 32.768 KHz
Duty Cycle: Transmits 2 pulses with a
duration of 0.0635 sec. each every 0.5
seconds.
Signal Output: 9V Supply 24 V Supply
High Setting: 1A, 31V 3A, 105V
Medium Setting: 1.8A, 13V 6A, 45V
Low Setting: 3.0A, 6.5V 10A, 22V
Fuse: Fast acting 2A @250V 3AG .25" x
1.5"
Cat no. 2502-6X32
Battery: 9V alkaline (Amprobe Model
MN-1604), 24V jack will accept battery
pack accessory (B2024 or B2025)
Case: Flame retardant ABS911
When the A2201CE
INDUCTIVE CLAMP is clamped around an energized line with current flowing
and plugged into the T2200 Transmitter, it will induce a signal onto the
downstream (load) side to enable identification of equipment on that circuit.
The A2201 comes with the AT-2004 and AT-2005.
A2201CE Clamp-on
Transmitter Accessory ---
Operating Frequency: 32.768 KHz as supplied
by the T2200
Case Breakdown Voltage: 3000 Volts
Maximum Wiresize: 2000 MCM or 2" dia.
cable
Battery: None, power is supplied by T2200
General:
Operating Temperature: 0 to 120°F
Storage Temperature: -40 to 150°F
Case Material: ABS
Case Size: 11" x 15.5" x 4" (39.4x27.9x10.2
cm) |
|
